[LINK]: Danfoss MCT 10 Set-up Software (FULL VERSION)

[johnbeveridge1]

Hi there

Can anyone help me with a FULL version of the following Danfoss drive software

VLT® Motion Control Tool
MCT 10 Set-up Software

I have downloaded the BASIC version directly from the Danfoss website at the following link

http://www.danfoss.com/United_Kingdom/B ... rogram.htm
or http://plcforum.uz.ua//M ... ld_601.zip
This is good stuff but is severly limited without keycode.

Cheers!

[TheNewS7]

CD-Code: 12314500

Lizenz-Code: 66808920

[randystide]

Thanks so very much I needed the full blown version of MCT-10 keep up the good share

[shodan_den]

Hi guys

I wanna test Danfoss VLT MCT 10 Software Customizer and looking for an activation key.

I allready have the key for full software but not for the Software Customizer

[Jorge87_e]

CD-Code: 12314500

Lizenz-Code: 66808920

[eujuiz]

I can't open the mct10 program with this key for version 5.7. Has anyone had this problem?

[Roland66]

Hello everyone,

really interesting forum.
I have the same problem with MCT10 5.50.
Is there a new key?

Kind regards

[Yousufsiddiqi]

use the mct 10 old version from plc4m3
CD-Key : 12314500
Full-Key: 66808920