Hello, my Diagnose page on a 840C NC displays "DEUTSCH"
How can I change it in english?
840C system language
-
robj
- Posts: 8
- Joined: Sun Mar 13, 2011 8:42 am
Re: 840C system language
Hi,
the only 840C I've done a language change on had to have a new set of system EPROMs from Siemens.
I also had to re-do the machine builders EPROMs that contain the user menus and messages etc. for the PLC side of the system; reading those out and translating all the text elements by hand and then programming the modified data in to a set of new EPROMs for the PLC.
RJ.
the only 840C I've done a language change on had to have a new set of system EPROMs from Siemens.
I also had to re-do the machine builders EPROMs that contain the user menus and messages etc. for the PLC side of the system; reading those out and translating all the text elements by hand and then programming the modified data in to a set of new EPROMs for the PLC.
RJ.
-
geobuild
- Posts: 5
- Joined: Fri Apr 24, 2020 7:34 pm
Re: 840C system language
Hi
Do you have a install or hard disk image for sinumerik 840 c version 6.xx?
thanks
Do you have a install or hard disk image for sinumerik 840 c version 6.xx?
thanks