[?+]: How activate automation studio v3.0 B&R ?

technofreek · Post by **technofreek** » Wed Apr 09, 2014 10:50 am

bozob wrote:crack for AS_3.00.90.0027

changes in PG.exe

Offset 2B410 - cc 06 00 00 01 eb 30 6a 00 8d 8d 20 f2 ff ff ff - eb to 75

Offset 2B5D0 - 42 00 e8 cb 19 08 00 83 c4 18 89 85 1c f2 ff ff - to 90 90 90 90 90

Offset 2BFD0 - 70 FF D0 83 BD C4 F0 FF FF 00 74 62 33 C9 66 89 - to 90 90

Thanks a ton bozob!! You are a lifesaver!

Those who want to upgrade to AS_3.00.90.0027; download the upgrade from http://www.br-automation.com/en-in/down ... ersion=all

Also your correction is typed incorrectly ; it should be as follows

Offset 2B410 - cc 06 00 00 01 75 30 6a 00 8d 8d 20 f2 ff ff ff - 75 to eb

Offset 2B5D0 - 42 00 e8 cb 19 08 00 83 c4 18 89 85 1c f2 ff ff - to 90 90 90 90 90

Offset 2BFD0 - 70 FF D0 83 BD C4 F0 FF FF 00 74 62 33 C9 66 89 - to 90 90

Bartasek · Post by **Bartasek** » Wed Apr 09, 2014 8:16 pm

If anyone can help me to crack pg.exe file for AS_2.6.0.7?

What you need from my to do this, serial?

Many thank's.

markento · Post by **markento** » Mon Apr 28, 2014 5:03 pm

Could anybody share B&R AS 2.7.0.X install, if possible with cracked pg.exe.

SolarSoul · Post by **SolarSoul** » Tue Jul 01, 2014 6:47 am

If this can help somebody, for AS 3.0.90.24 SP06 the pg.exe should be modified as follow:

0x2b415 | 75 | must be replaced by | eb |
0x2b5d3 | e8 cb 19 08 00 | must be replaced by | 90 90 90 90 90 |
0x2bfda | 74 62 | must be replaced by | 90 90 |

It took me less than 1 hour to find which ones I needed to correct. So I guess it's not more difficult for any other version.

You're welcome...

miri56 · Post by **miri56** » Thu Jul 03, 2014 5:38 am

hi
please upload b&r automation studio 4 and crack
thanks

technofreek · Post by **technofreek** » Fri Jul 04, 2014 8:30 am

markento wrote:Could anybody share B&R AS 2.7.0.X install, if possible with cracked pg.exe.

Hello All;

I am also in requirement of the crack for B&R AS 2.7.0.X install.

Markento, you can download it directly from B&R website
http://www.br-automation.com/downloads_ ... 07_Eng.exe

ppp · Post by **ppp** » Fri Jul 04, 2014 9:14 am

SolarSoul wrote:.....
It took me less than 1 hour to find which ones I needed to correct. So I guess it's not more difficult for any other version.

You're welcome...

Your crack is not full.
Only for offline mode (pg.exe).
For online used pviman.exe.

SolarSoul · Post by **SolarSoul** » Fri Jul 04, 2014 9:28 am

It was my first try... Do you know any informations about the pviman.exe? 'cause I saw nothing in this post...

ppp · Post by **ppp** » Fri Jul 04, 2014 10:31 am

SolarSoul · Post by **SolarSoul** » Tue Jul 08, 2014 9:27 am

Can I ask you if there is any information about how to "fix" this issue? I mean, is there any example of an other version or this version. So I can try if I can modify this file.
I'm not sure if I'm clear enough... I need some help to do a complete "crack" tutorial... Thx

Amidamaru · Post by **Amidamaru** » Fri Jul 18, 2014 9:17 am

Hi! I have a problem, need activate Automation Studio v2.6 SP2. Somebody know how do it this? Help me please!

dracog71 · Post by **dracog71** » Sat Oct 11, 2014 12:27 am

Hi everyone!.. need AS V 2.4 !.. in the B&R page it's only de "upgrade" donload. not the entire aplicattion... if someone has the Automation Studio V2.4 "demo2 i can build a crack the "pg" of that version.. so, we all win.. plz help me.. i really need that AS !!

mohdabshr · Post by **mohdabshr** » Sun Dec 28, 2014 6:11 am

hello please I need help for How activate automation studio v2.6 B&R ? or if some body have crack for pg.exe for this version to share.

thanks

George SM · Post by **George SM** » Fri Jan 16, 2015 3:18 pm

Dear friends,

does anybody have an info how to activate Deutsch version of Automation Studio?
I use 3.0.90.20 SP02 English version (activated) In the zip file which I have downloaded there was only pg.exe for English version!
English for me is good but my boss doesn't speak English. He needs Deutsch version.

We also use English version 2.6.0.14 SP04. It is not activated.

We will be glad to get any activated Deutsch version. It is better newer version!

Thanks a lot!!!!!!

__________________________________________________________________________________________________________________
Коллеги привет!

кто нибудь знает как активировать немецкую версию Automation studio?
У меня есть скаченная 3.0.90.20 SP02. В комплекте был pg.exe только для английской версии.
Для меня английской версии достаточно, но мой босс плохо понимает английский и ему нужна немецкая версия.

Мы также пользуемся trial версией 2.6.0.14 SP04 (английская).
Мой босс был бы рад любой активированной немецкой версии. Желательно поновее.

Большое Спасибо!

Hommit · Post by **Hommit** » Wed Jan 28, 2015 10:47 am

Hello
Can you tell what i should look for with IDA to crack any version? Whats is their name? As i understand, it is address of some functions and result of register check.

How the crack is made? Ty.

Here is setups i found for versions 2.7.0.7, 3.0.90.21, 4.0.14.208 and 4.1.4.402
http://entas.ru/content/automation-studio
(if you going to install help upgrade 4.1.5 for AS4.1.4, unpack zip, download help upgrade from official site and replace install file in \Setups\AddOn folder - for whatever reason my version refused to install it from Upgrades menu, this way it install correctly with main installation process)

elektronikmuh · Post by **elektronikmuh** » Thu May 21, 2015 7:34 pm

Do you have B&R Automation Studio v4.2 cracked pg.exe?
muh.elektronik@gmail.com

rotkiv · Post by **rotkiv** » Sat Aug 22, 2015 6:31 am

Need AS4 too (((.

zaplatin · Post by **zaplatin** » Tue Mar 22, 2016 12:08 pm

ol_zy wrote:If it intersting so
Correct modification for AS_3.00.90.0020

Try the following adjustments
Code:
Using HexEditor Change the following
Offset 2AF98 75 to EB
Offset 2B2A3 E8 6B 14 08 00 to 90 90 90 90 90
Offset 2bc9b 74 62 to 90 90
Code: Select all
90h = NOP
I am testing it is work.

How long it working? I cant found WINHEX good and I had use http://www.ultraedit.com/

ol_zy · Post by **ol_zy** » Sat Jun 11, 2016 5:08 pm

zaplatin wrote:
ol_zy wrote:If it intersting so
Correct modification for AS_3.00.90.0020

Try the following adjustments
Code:
Using HexEditor Change the following
Offset 2AF98 75 to EB
Offset 2B2A3 E8 6B 14 08 00 to 90 90 90 90 90
Offset 2bc9b 74 62 to 90 90
Code: Select all
90h = NOP
I am testing it is work.
How long it working? I cant found WINHEX good and I had use http://www.ultraedit.com/

It's work till now so you can use it any time.
Is somebody have activation for v4.2.4.149?

malek · Post by **malek** » Tue Aug 16, 2016 12:25 am

Приветствую!
Прошу помощи в поиске старых версий Automation Studio 2.5.1 или 2.5.3. Все прежние ссылки уже не работают.

jevticel · Post by **jevticel** » Mon Sep 05, 2016 1:42 pm

Hello,
Can amnyone upload Automation_Studio older version,2.2,2.3,2.6?
Because my project is old and i can't open with V2.7 and V3.0.90.
Please for help!

Thanks!

Morpheus_11 · Post by **Morpheus_11** » Tue Mar 07, 2017 11:06 pm

Hello,
I'm new to this forum, I unexpectedly have to work with B&R PLCs the next months and I really need B&R automation studio version 3.0.90 for my work. Is there anyone who has that software and can upload it anywhere for me? would really help.

Also, if there is already any crack for this version, I would also very appreciate that, but first and for most I need the software.

ol_zy · Post by **ol_zy** » Wed Mar 08, 2017 5:33 am

Morpheus_11 wrote:Hello,
I'm new to this forum, I unexpectedly have to work with B&R PLCs the next months and I really need B&R automation studio version 3.0.90 for my work. Is there anyone who has that software and can upload it anywhere for me? would really help.

Also, if there is already any crack for this version, I would also very appreciate that, but first and for most I need the software.

Just read this topic http://entas.ru/content/automation-stud ... qt-maintab

George SM · Post by **George SM** » Wed May 17, 2017 2:17 pm

If somebody has activation for v4.Х.Х - please share!

Thank you in advance!

Если у кого нибудь есть кряк на v4.Х.Х - поделитесь, пожалуйста, добрые люди!

Спасибо!

digetp · Post by **digetp** » Sat May 20, 2017 9:16 pm

Hi is what someone has codes to change to enable AS 3.0.90.21 in pg.exe ? thanks

chackerhz · Post by **chackerhz** » Mon Aug 07, 2017 1:32 am

hi：All

Could you help me to crack this two files as AS4.0 (http://pan.baidu.com/s/1c13dzQK ) and share some method with picture?

Thank you very much

chackerhz

umaralhasni · Post by **umaralhasni** » Sat Aug 26, 2017 8:04 am

how can i change the security mode TRIAL to RUNTIME on PVI Monitor
B&R V3.0
please help

proeng · Post by **proeng** » Tue Oct 31, 2017 9:27 am

umaralhasni wrote:

how can i change the security mode TRIAL to RUNTIME on PVI Monitor
B&R V3.0
please help

I need,please hhelp.

ppp · Post by **ppp** » Fri Nov 03, 2017 11:43 am

jevticel wrote:Hello,
Can amnyone upload Automation_Studio older version,2.2,2.3,2.6?
Because my project is old and i can't open with V2.7 and V3.0.90.
Please for help!

Thanks!

Automation Studio v2.2.1 (with crack offline and online)
http://www63.zippyshare.com/v/fZ3H00Fv/file.html
http://www63.zippyshare.com/v/xbWw9j4t/file.html

ppp · Post by **ppp** » Mon Nov 06, 2017 4:45 am

proeng wrote:
umaralhasni wrote:

how can i change the security mode TRIAL to RUNTIME on PVI Monitor
B&R V3.0
please help
I need,please hhelp.

proeng · Post by **proeng** » Mon Nov 06, 2017 9:24 pm

ppp wrote:
proeng wrote:
umaralhasni wrote:

how can i change the security mode TRIAL to RUNTIME on PVI Monitor
B&R V3.0
please help
I need,please hhelp.
Automation Studio 3.0.71.9 (with crack offline and online) 15 parts

http://www112.zippyshare.com/v/OXJJcPg9/file.html
http://www112.zippyshare.com/v/KZVq2gJa/file.html
http://www112.zippyshare.com/v/qNaQQeJP/file.html
http://www112.zippyshare.com/v/pO19wbmx/file.html
http://www112.zippyshare.com/v/tdQXS2iE/file.html
http://www112.zippyshare.com/v/ajO3dBWb/file.html
http://www112.zippyshare.com/v/8h9B0uvu/file.html
http://www112.zippyshare.com/v/kkzfPkb3/file.html
http://www112.zippyshare.com/v/N0PVrZNc/file.html
http://www112.zippyshare.com/v/CCUMURHI/file.html
http://www112.zippyshare.com/v/yJRDjAoN/file.html
http://www112.zippyshare.com/v/P5sLE87g/file.html
http://www112.zippyshare.com/v/ITTeF681/file.html
http://www112.zippyshare.com/v/9TMdRBX6/file.html
http://www112.zippyshare.com/v/FHIBH3p5/file.html

only crack
http://www38.zippyshare.com/v/o6Qj6tby/file.html

proeng · Post by **proeng** » Fri Nov 10, 2017 12:37 pm

proeng wrote:
ppp wrote:
proeng wrote:
umaralhasni wrote:

how can i change the security mode TRIAL to RUNTIME on PVI Monitor
B&R V3.0
please help
I need,please hhelp.
Automation Studio 3.0.71.9 (with crack offline and online) 15 parts

http://www112.zippyshare.com/v/OXJJcPg9/file.html
http://www112.zippyshare.com/v/KZVq2gJa/file.html
http://www112.zippyshare.com/v/qNaQQeJP/file.html
http://www112.zippyshare.com/v/pO19wbmx/file.html
http://www112.zippyshare.com/v/tdQXS2iE/file.html
http://www112.zippyshare.com/v/ajO3dBWb/file.html
http://www112.zippyshare.com/v/8h9B0uvu/file.html
http://www112.zippyshare.com/v/kkzfPkb3/file.html
http://www112.zippyshare.com/v/N0PVrZNc/file.html
http://www112.zippyshare.com/v/CCUMURHI/file.html
http://www112.zippyshare.com/v/yJRDjAoN/file.html
http://www112.zippyshare.com/v/P5sLE87g/file.html
http://www112.zippyshare.com/v/ITTeF681/file.html
http://www112.zippyshare.com/v/9TMdRBX6/file.html
http://www112.zippyshare.com/v/FHIBH3p5/file.html

only crack
http://www38.zippyshare.com/v/o6Qj6tby/file.html

Hi friends,
not full.I tried one,communication is lock after 2 hours(Locked).Our machine is stopping.B & R's motherboard is broken.I ran the software on another pc. But I need PVI Maneger full version.Our pvi stops communication after 2 hours.

Best regards

proeng · Post by **proeng** » Mon Jan 08, 2018 11:48 am

Help me please my friends. I am in a difficult situation.

(old or new version PVI Manager)
Regards

pedritocar · Post by **pedritocar** » Tue Jan 23, 2018 9:03 pm

Hello!
I am a student in electronic and I would like to use B&R Automation Studio for my school project.
Can you help me to get this software with the crack?
Thank you in advance

cccbbbaaa · Post by **cccbbbaaa** » Tue Apr 30, 2019 12:46 pm

Key generator for AS version 2, 3, 4 :
https://we.tl/t-xlWEMFwtGc

ol_zy · Post by **ol_zy** » Wed May 01, 2019 10:25 am

cccbbbaaa wrote: ↑Tue Apr 30, 2019 12:46 pm Key generator for AS version 2, 3, 4 :
https://we.tl/t-xlWEMFwtGc

Don't work for 4,2 version.
Generated secondary code is invalid

lisnuk · Post by **lisnuk** » Tue May 14, 2019 7:47 am

cccbbbaaa wrote: ↑Tue Apr 30, 2019 12:46 pm Key generator for AS version 2, 3, 4 :
https://we.tl/t-xlWEMFwtGc

Transfer deleted, reload please !

engrmunir786 · Post by **engrmunir786** » Thu May 16, 2019 5:56 pm

Dear experts
i have downloaded B&R 4.2 new version from below mention link
https://www.br-automation.com/en/downlo ... redirect=1
how to activate it..

cccbbbaaa · Post by **cccbbbaaa** » Thu May 16, 2019 7:27 pm

Try this link:
https://we.tl/t-BraeFEiXkc

Choose Automatio Studio (Legacy)
B&R serial number: 12345678901

lisnuk · Post by **lisnuk** » Wed May 22, 2019 8:16 am

Thank you

chriss_russell · Post by **chriss_russell** » Thu May 30, 2019 2:37 pm

hi can you reupload that keygen for br 2 3 4 please

chriss_russell · Post by **chriss_russell** » Thu May 30, 2019 2:46 pm

cccbbbaaa wrote: ↑Tue Apr 30, 2019 12:46 pm Key generator for AS version 2, 3, 4 :
https://we.tl/t-xlWEMFwtGc

please reupload

Dinda · Post by **Dinda** » Wed Jun 05, 2019 6:41 pm

https://my-files.ru/v43p62

asif25 · Post by **asif25** » Sat Jun 22, 2019 7:02 am

ppp wrote: ↑Fri Nov 03, 2017 11:43 am
jevticel wrote:Hello,
Can amnyone upload Automation_Studio older version,2.2,2.3,2.6?
Because my project is old and i can't open with V2.7 and V3.0.90.
Please for help!

Thanks!
Automation Studio v2.2.1 (with crack offline and online)
http://www63.zippyshare.com/v/fZ3H00Fv/file.html
http://www63.zippyshare.com/v/xbWw9j4t/file.html

Hi
Hope so you are doing fine
I need B&R Automation Studio V2.2. Can you please help about it. The above links are expired. Kindly attach recent link that'll be great help.

Thanks

ilcalmo · Post by **ilcalmo** » Fri Jul 05, 2019 9:24 pm

Dinda wrote: ↑Wed Jun 05, 2019 6:41 pm https://my-files.ru/v43p62

Hi,
file has been deleted!
Could someone upload again?

Thank you.

Hammer2 · Post by **Hammer2** » Tue Jul 30, 2019 6:45 am

I have found it on the following site:
https://anonfile.com/T37dx7t5ne/AS_code_v4.xx_rar
It doesn't seem to work for latest v4.6 as AS does not take legacy license code types anymore (like 12345678901) but only in format XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

mbiella · Post by **mbiella** » Wed Dec 02, 2020 7:51 am

Hi everyone,
is there anything working with the new license format? Something like a keygen maybe?

Juts · Post by **Juts** » Wed Dec 09, 2020 7:56 am

Hey, does anyone have a license for pvi in order to put it in runtime plz ?

giorgio_i · Post by **giorgio_i** » Mon Feb 22, 2021 9:30 pm

Hi everybody,
how can I crack PVIMAN.exe 3.24 ?

giorgio_i · Post by **giorgio_i** » Thu Feb 25, 2021 9:47 pm

Hammer2 wrote: ↑Tue Jul 30, 2019 6:45 am I have found it on the following site:
https://anonfile.com/T37dx7t5ne/AS_code_v4.xx_rar
It doesn't seem to work for latest v4.6 as AS does not take legacy license code types anymore (like 12345678901) but only in format XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

Hi, did you find how activate 4.9? I also have only in format XXXXX-XXXXX-XXXXX-XXXXX-XXXXX and can't run it at all