Aucotec Elcad Aucoplan v7.11

[john_smith]

Hi,

version 7.10 on Aucotec site :
https://www.aucotec.com/modules.php?op= ... ask4mail=0

@bsod, can you do some magic ?

[thenewer]

Can anybody help me with elcad 7.90 SP2

Thank you very much

[pepe1232]

Anybody help me with elcad 7.9.0 sp2 in spanish. I need activation Thank you

[bichochu]

I installed the Elcad v7.9 sp1 Italian version and use the crack for this version , copy the file alwin.exe and then install the Spanish version sp2 and copy this file and it works.
No if it worked mostly because I have not tested thoroughly but apparently yes. ; )
Download Link
Password : aucotec

https://mega.co.nz/#!H1pSkJSJ!ax7RdLaXm ... 6pyEvWt9aE

[keymak]

Hello

I am searching the medicine for Elcad 7.10 with SP3 for German

Thanks for all

keymak

[xblu]

I am searching the medicine for Elcad 7.10

[xblu]

7.11 ???

[john_smith]

hi,

v11 can be downloaded from aucotec site ...
https://service.aucotec.com/modules.php ... ask4mail=0

but it needs some magic

[bsod]

Hi,

for Aucotec Elcad 7.11.0 - NOT TESTED !!!

http://www.xup.in/dl,14889229/aes7110.rar/

Pass: Aucotec

bsod

[duckman]

Thanks bosd for the clean crack, l also haven't tested it.
Result of crack check

VirusTotal
SHA256: 4cc72109e5e3f8fac787ddfc2cd3b3da85541454dd5f826ded37b81e12d2c13f
File name: alwin.exe
Detection ratio: 0 / 56
Analysis date: 2016-04-01 07:10:10 UTC ( 1 minute ago )
Regards

[john_smith]

thanks bsod,

confirm working ..

[dvnhan]

Could you re-upload medicine of V7.11?

Tks!

[Carlos]

do not forget to uncheck the box below

Code: Select all

https://www.datafilehost.com/d/b981d68c

771

[cakal477]

Aucotec Elcad Aucoplan v7.11
Author: AUCOTEC AG
Version: 7.11
file : ISO
size: 525 MB

Download Direct Link ELCAD 7.11 here :

https://goo.gl/qJT64R

[cakal477]

crack file for elcad 7.11 please

[Carlos]

do not forget to uncheck the box below

Code: Select all

https://www.datafilehost.com/d/133e698b

711
edit: is down

[cakal477]

please 7.11 crack file

[Carlos]

selftester

https://www.datafilehost.com/d/bfea6f4f

do not forget to uncheck the box below

[dvnhan]

Thanks you very much, Carlos!

[Fuso]

Hi all, i'm new!

I need medicine for elcad 7.11 and please tell me how to apply this medicine

[Hatshepsut82]

Hi Everyone, I´m really need this software but i checked already all the links here and I can not find any version of Elcad with the respective crack or medicine, all links are already blocked :´( I just want this software Elcad in any version with the respective crack. If someone can please help me! Pleassseeee. Thnks.

[Carmelinfc]

I just downloaded the iso version 7.11. from: https://goo.gl/qJT64R


Is there any medicine to activate the program?

[Carmelinfc]

I just downloaded the files to medicate the program.
I just try and do not work.
Get the following message:

"Program files differ from the original ones.
The program might créate erroneous Project data."

After then close the program.
Know any other solution to disable the "demo" function and to work with all features.
Thank you

[john_smith]

try to uninstall, then clear registry (anything involving elcad) and install again

don't start the program before applying patch

I just downloaded the files to medicate the program.
I just try and do not work.
Get the following message:

"Program files differ from the original ones.
The program might créate erroneous Project data."

After then close the program.
Know any other solution to disable the "demo" function and to work with all features.
Thank you

[Carmelinfc]

Thank you very much for your help John_smith.
I just followed his instructions and now it seems to work.
Then leave the steps taken to get it to work properly for those who may need:

1 Download the program from: https://goo.gl/qJT64R
2nd Download medicine from: 7110.rar - 3.5 MB
3rd Delete the pc making reference to AUCOTEC and Elcad. Both files and registry entries. For this I used the REVOUNISTALLER program.
4th ELCAD program installed version 7.11
5th run the program and leaves a window of selection of type of rules to use. Select appropriate to needs, normally IEC-international.
6th Give OK
7th Copy the file of medicine in the working directory.

and ready.

[kip_88]

Thank you very much for your help John_smith.
I just followed his instructions and now it seems to work.
Then leave the steps taken to get it to work properly for those who may need:

1 Download the program from: https://goo.gl/qJT64R
2nd Download medicine from: 7110.rar - 3.5 MB
3rd Delete the pc making reference to AUCOTEC and Elcad. Both files and registry entries. For this I used the REVOUNISTALLER program.
4th ELCAD program installed version 7.11
5th run the program and leaves a window of selection of type of rules to use. Select appropriate to needs, normally IEC-international.
6th Give OK
7th Copy the file of medicine in the working directory.

and ready.

Where is the link for second, 7110.rar?

[Carmelinfc]

The second link is:

https://www.datafilehost.com/d/bfea6f4f

or

https://userscloud.com/j1mztnn2o091

[keymak]

Hello

Is there any medicine to activate the 7.12 version ?

thanks
keymak

[kashavar]

The second link is:

https://www.datafilehost.com/d/bfea6f4f

or

https://userscloud.com/j1mztnn2o091

The requested file (ID# bfea6f4f) no longer exists on DATAFILEHOST.COM.

Can anybody help
Respect
kashavar

[mogz]

is there any help for Elcad v 7.13 / Elcad 2018 ?

[KalBur]

Please some one to help me wit medicine: 7110.rar - 3.5 MB

[M1S5]

Hi
is there any "help" for the latest version of Elcad - Elcad 2019
Thanks

[jgonzcas]

Please some one to help me wit medicine: 7110.rar - 3.5 MB

[mike1976]

No medicine ??

[mos388]

I'm also interested in this matter...
Anyone?

[seppal]

Hello, need Elcad 7.11 incl. med. (or higher)

can anybody help me?


thx