Eplan P8 2.8/2.9 + personal keygen

s1921707 · Post by **s1921707** » Thu May 26, 2022 1:43 pm

Win10 1903 cracking failed！

qjjxh · Post by **qjjxh** » Fri May 27, 2022 12:27 am

The license is not valid for this machine when delete epl.dll.
Startup unreacted after copy epl.dll.
windows 11 pro for for workstations 21H2 22000.675

It works under Windows 10 enterprise LTSC2021 21H2 19044.1706

djto · Post by **djto** » Fri May 27, 2022 3:36 pm

error

djto · Post by **djto** » Fri May 27, 2022 3:38 pm

Additional Information:
When I start the application, and in the directory there is the file C: \ Users \ Public \ EPL \ epl.dll, the error message is as follows: EPLAN.exe - Application Error x Could not start correctly l 'application (0x0000142)
Click OK to close the application.

If I start the application without the epl.dll file the error message is:
License check (MAX 70.58)
The license 'C: \ user \ public \ EPLAN \ common \ lservrc' is not valid for the computer in use

chaos363 · Post by **chaos363** » Sun May 29, 2022 9:21 pm

new try ;P

Download: https://gofile.io/d/EmZhHH

debugman · Post by **debugman** » Sun May 29, 2022 11:50 pm

Installation succeeded. Thank you for your work.

qjjxh · Post by **qjjxh** » Mon May 30, 2022 12:22 am

success

debugman · Post by **debugman** » Mon May 30, 2022 3:57 am

With the new Crack, I can't export project files to PDF, DWG, etc

syfgx · Post by **syfgx** » Mon May 30, 2022 4:42 am

Thank you very much!

520arrow · Post by **520arrow** » Mon May 30, 2022 6:53 am

Thanks a lot to Chaos363 first
The new Crack could export project files to PDF, DXF/DWG and Image files in EPLAN Eletric 2022 with update 4; but only export dwg/dxf files in EPLAN Pro Panel 2022 with update 4

Jake1 · Post by **Jake1** » Mon May 30, 2022 6:46 pm

Thanks a lot, chaos

i will test it!

Greetings!

UzOdin · Post by **UzOdin** » Mon May 30, 2022 8:06 pm

In the keygen there is no Eplan View "Modules", just "Systems" exist. I think that's why Eplan View 2022 doesn't work.
Please try to fix it:
https://gofile.io/d/wE3D29

chaos363 · Post by **chaos363** » Mon May 30, 2022 9:17 pm

I can start eplan view successfully.

No module is needed in keygen, only System_166 "EPLAN View." Attention, there is a second entry without dot at end.

So that the license file "lservrc" can be used for EPLAN View, a copy must be created and renamed to "lservrc_view". Thus two license files exist in the same directory with different names.
C:\Users\Public\EPLAN\Common

leewheel · Post by **leewheel** » Mon May 30, 2022 11:24 pm

Thanks！ It's Great！

UzOdin · Post by **UzOdin** » Tue May 31, 2022 3:44 am

Thank you! It works!

520arrow · Post by **520arrow** » Tue May 31, 2022 6:50 am

EPLAN View 2022 started with system_166 "EPLAN View." There is a second entry with dot at end.

djto · Post by **djto** » Tue May 31, 2022 7:47 am

Hello,
i have 2 problem with eplan 2022.
1) when i close, it restarts by itself.
2)Identification check:
To continue working with the EPLAN solution, you must register with ePULSE no later than Thursday 9 June 2022 18:52:48.
An activity was canceled.
How can I do?

Thanks

Jake1 · Post by **Jake1** » Tue May 31, 2022 4:13 pm

Hi,

Be sure you use 2022 with Update 4, not a lower update! A fault in microsoft patch let Eplan start itself.
And use crack 1.0.4 from chaos with Eplan_ultimate.tpl, then Eplan works.

Greetings

Jake1 · Post by **Jake1** » Tue May 31, 2022 6:42 pm

Hab grad ein Projekt mir 500 Seiten als PDF exportiert, ohne Probleme!

I just exported a project with 500 pages as a PDF without any problems.

djto · Post by **djto** » Wed Jun 01, 2022 7:57 am

Thanks Jake1, after update 4 everything is ok
Thanks especially to Caos363
have a good day

roguebear · Post by **roguebear** » Wed Jun 01, 2022 9:35 am

Hi, which microsoft patch will affect eplan ?

Jake1 · Post by **Jake1** » Wed Jun 01, 2022 10:14 am

Information from EPLAN:
After a Microsoft Office 365 update (e.g. build number 16.0.15028.20160), it was possible that the EPLAN platform automatically restarted after it was exited. This has been corrected. A workaround has been implemented in this EPLAN update. According to information from Microsoft, this issue will be addressed in another Microsoft Office update in the near future.

xflash · Post by **xflash** » Thu Jun 02, 2022 5:27 pm

chaos363 wrote: ↑Sun May 29, 2022 9:21 pm new try ;P

Download: https://gofile.io/d/RgWozi

Works well for eplan 2.9 but EplanCommon.lit and EplanCommon.lir are not update-to-date...

Could mast chao363 reupload those two files for 2.9 special use?

I need tried with old keygen, it works well too, but EplanCommon.lit and EplanCommon.lir are not update-to-date still exists.

Thanks again and it is glad that Master chao363 has came back! Vielen Danke!

update: I updated the license client to 9.1.17.24900 those two files are back, and at same time I use 1.0.1's tpl (EPLAN_Ultimate.tpl), the not update-to-date reminder disappeared.
I guess in 2.9 there is not check for "Module 30108" No Identity Check", so there will be that message.

Hoping helping someone, thank you all.

P.S. I did not patch hosts file, it works well too.

xdoit · Post by **xdoit** » Sat Jun 04, 2022 5:40 am

Could someone share Eplan Preplanning 2022,please? I have been looking for this installation package on the Internet for a long time, but I have not been able to find it out.
In any case, thanks for your help …

Klamsi · Post by **Klamsi** » Sat Jun 04, 2022 9:24 pm

@xflash
"P.S. I did not patch hosts file, it works well too."

A very stupid idea. Without firewall rules and hosts rules, your eplan sends everything about you to their server when it starts.

xflash · Post by **xflash** » Sun Jun 05, 2022 12:42 am

I just test it, as I use proxy too much, hosts block may fail at any time......

chaos363 · Post by **chaos363** » Sun Jun 05, 2022 12:31 pm

debugman wrote: ↑Mon May 30, 2022 3:57 am With the new Crack, I can't export project files to PDF, DWG, etc

I can export projects to pdf in both eplan electric and propanel. Use my license template to test if this helps.

xflash wrote: ↑Thu Jun 02, 2022 5:27 pm Works well for eplan 2.9 but EplanCommon.lit and EplanCommon.lir are not update-to-date...

I had already described the problem with EplanCommon.lit in another post. The template I provide usually refers to the current version, which causes warning messages for older ones.
So that license can be cleaned, I have built a function into keygen, where the current list is compared with valid licenses. For valid entries you have to select EplanCommon.lit of your current installation, which is mostly found under C:\ProgramData\EPLAN\ELC.
So for a "clean license" you select your template, which will fill list, click on "Lit Sync" and select the appropriate file. Keygen should open relevant path automatically.

EPLAN_Patch_1_0_5
Download: https://gofile.io/d/EmZhHH

xflash · Post by **xflash** » Sun Jun 05, 2022 5:00 pm

Great thanks!

roguebear · Post by **roguebear** » Mon Jun 06, 2022 1:55 am

Hi Chao363,
would u please help check I cannot open 2022, When the startup screen comes to the end, it will be closed and cannot be started.
win10 21h2 19044.1645, up43.17756 , license3.361 , office 2021--16.0.15225。20172 64bit the newest version of office.

Fix it. must update the en-us and en-ch language to the 17756.
all great! thanks chao363!

520arrow · Post by **520arrow** » Mon Jun 06, 2022 2:10 am

Hi Chaos363, with EPLAN_Patc_1_0_5, I still couldn't export projects to pdf in Pro Panel and EPLAN View.

debugman · Post by **debugman** » Mon Jun 06, 2022 5:48 am

After that time, I restarted my computer, I was able to export all files. So in fact, 1.0.4 should be no problem.At least there is no problem with export the file.

Jake1 · Post by **Jake1** » Mon Jun 06, 2022 9:05 am

Hi,

Anybody can change a frame-form on page properties?
I can choose a different frame but it will not be saved.

Greetings

elfo106 · Post by **elfo106** » Mon Jun 06, 2022 12:13 pm

chaos363 wrote: ↑Sun Jun 05, 2022 12:31 pm EPLAN_Patch_1_0_5
Download: https://gofile.io/d/EmZhHH

Hi chaos, first thank you for the hard word!
I need some help please.

Some time ago I installed the eplan electric p8 2022 but I was never able to make it work so I gave up. Now I tried gain...I installed the update 4, run the patcher, replaced the EplanCommon.lit and Eplan_Ultimate.tpl and opened the keygen. In the keygen I pressed TPL load button and selected the Eplan_ultimate.tpl file, then pressed Lit sync and selected the EplanCommon.lit then pressed Create and replaced the lservrc file for the one that the keygen generated.

When I try to open the eplan, the Select License window shows up. I select "Load activated licenses" and choose the lservrc file that was previously generated. This error shows up:

What I'm I doing wrong? Maybe is the HWID that appears in the keygen that doesn't match mine? How can I check that? Something else??

Thank you!

roguebear · Post by **roguebear** » Mon Jun 06, 2022 2:22 pm

HI chao363,
everything is ok. but run after a period of time, open attribute->display by double click the components is very slow.
Would u please help check this ?

roguebear · Post by **roguebear** » Mon Jun 06, 2022 2:39 pm

Can edit pdf export settings. must check "generate device pages"

xdoit · Post by **xdoit** » Tue Jun 07, 2022 1:51 am

Jake1 wrote: ↑Mon Jun 06, 2022 9:05 am Hi,

Anybody can change a frame-form on page properties?
I can choose a different frame but it will not be saved.

Greetings

It works well on my laptop, Win11 Pro 22H2 +　EPLAN 2022 Update 4.
I'm still not using the latest patch from CHAOS363 when testing on my laptop. The patch version I am using is 1.0.3。

linp · Post by **linp** » Tue Jun 07, 2022 2:27 am

I have used the patch of "chaos363" and it can run normally, WIN10+EPLAN2022+UP4
but some functions of the software will fail after running for a few minutes. It is necessary to close EPLAN and run it again. After a few minutes, the problem will continue to repeat.

roguebear · Post by **roguebear** » Tue Jun 07, 2022 11:08 am

roguebear wrote: ↑Mon Jun 06, 2022 2:22 pm HI chao363,
everything is ok. but run after a period of time, open attribute->display by double click the components is very slow.
Would u please help check this ?

Cannot fix it. open attribute->display by double click the components become very slow after run minutes.

roguebear · Post by **roguebear** » Tue Jun 07, 2022 11:09 am

linp wrote: ↑Tue Jun 07, 2022 2:27 am I have used the patch of "chaos363" and it can run normally, WIN10+EPLAN2022+UP4
but some functions of the software will fail after running for a few minutes. It is necessary to close EPLAN and run it again. After a few minutes, the problem will continue to repeat.

check u office. maybe has two different versions .

roguebear · Post by **roguebear** » Tue Jun 07, 2022 11:10 am

Can u set your pdf export settings? like add delete up down....

Jake1 · Post by **Jake1** » Tue Jun 07, 2022 5:55 pm

After a complete reinstallation with patch 1.0.5 I cannot create new PDF schemas, I can edit the default schema but I cannot create a new one.

Edit:
After i started P8 i can change DT, create new shema for pdf export, ...
View minutes later all changes will not be saved, when i click "apply" the window will closed.

linp · Post by **linp** » Wed Jun 08, 2022 4:31 am

I have the same problem as you. After running for a few minutes, many functions will fail. I have re-installed the system and OFFICE, but still can't solve it.
WIN11+OFFICE2021+up4 Install in VMware

linp · Post by **linp** » Wed Jun 08, 2022 4:34 am

I re-installed office 2016, but it still doesn't work

debugman · Post by **debugman** » Wed Jun 08, 2022 4:49 am

When generating the lservrc file, Just change the default serial number（chaos363） to any other serial number.

Then enjoy it.

roguebear · Post by **roguebear** » Wed Jun 08, 2022 5:03 am

thanks！ I already change the chao363 into many other words. but still has the problem.

linp · Post by **linp** » Wed Jun 08, 2022 11:46 am

Thank you very much, now Eplan works fine

elfo106 · Post by **elfo106** » Wed Jun 08, 2022 1:18 pm

Hi! Is someone willing to help please? I'm I doing the correct steps?

Thank you!

Jake1 · Post by **Jake1** » Thu Jun 09, 2022 6:48 pm

Now it works for me too, there must be an "chaos filter" in EPLAN software

roguebear · Post by **roguebear** » Sat Jun 11, 2022 6:56 am

most problem cannot be solved.

roguebear · Post by **roguebear** » Sun Jun 12, 2022 11:45 am

PDF schema can edit. must check "generate device page" .

1. double click device and open propety will slower and slower....Until it is unbearable and needs to be restarted. Win10, LTSC, Win11 , Office 2016, Office 2021, access runtime 2010 2013...I test various combinations, I remove the check of translating , uninstall the typewirting ...the problem cannot be fixed . Would chao363 please help check it?
must set the color . the original setting is “from layer", if u set the color and save, the second speed of open property is very fast.

2. If use access2016_x64. the delay will dispear, and the speed of open page is very fast. but after about 5 minutes.. cannot modify the all value like font, color... the "apply“ and ”ok“ function is miss.

3. Patch 1.0.5 cannot use for 2.9 sp1 up10.

Note: maybe need new crack.

2. 2023 beta is avalible now in the 2.9 download manager. when you use select "download from eplan ". the second item. but cannot download it.