[?]: Unprotect Schneider PL7-Pro DFBs

[skystar]

hello vlad2006gr,i have a same problem with unity pro xl v13
i want to remove project protection password. can you help me?!

[vlad2006gr]

hello vlad2006gr,i have a same problem with unity pro xl v13
i want to remove project protection password. can you help me?!

Project? Upload your project to a file-sharing service, and they'll try to help you.

Please I need to open DFB program using PL7 pro program thanks

The link won't open.

[mo2a]

Hi all;
Pls, Can someone help open unlock sections in this program.
thanks in Advance.
https://drive.google.com/drive/folders/ ... drive_link

[vlad2006gr]

Hi all;
Pls, Can someone help open unlock sections in this program.
thanks in Advance.
https://drive.google.com/drive/folders/ ... drive_link

You have Control Expert v16.00, which has a different protection version than older programs. Unfortunately, we can't help you.

[funkwerkstatt]

есть возможность помочь с паролем от проекта сделанного в somachine 4.3?

[sheppard66]

Hi, can you please unlock this program? only sections are locked. TY

https://ufile.io/r9y75i2f

[lamjer65]

Hello, can you help me find the password for the sections of this Unity project please. Thank you all, have a nice day.
https://www.mediafire.com/file/yntuu3f5gti11gh/prog.auto.sta/file

[sheppard66]

Hello, can you help me find the password for the sections of this Unity project please. Thank you all, have a nice day.
https://www.mediafire.com/file/yntuu3f5gti11gh/prog.auto.sta/file

Don't know how to find the sections password

DFB
centritune_v2_15 => 100
Compteurs_débit => des
Compteurs_horaire => des
Entrées_ana => des
Gestion_arrêt_différé => des
Gestion_powerfloc_avec_dosatron => des
Gestion_vanne_gaveuse => des
Modbus_Vacon => des
Traitement_ctrls_couple => des
Traitements_des_discordances => des

[lamjer65]

Hello,
To access the Centritune section, we need to unlock the "Section & Program Units" password.
Thank you.

[marco_valhalla]

Hello, can you help me find the password on pl7 pro for this file
https://www.mediafire.com/file/lgyw21i4yrklmej/sassari_15b07.stx/file

[noenguyen]

Hi everyone,

Please help me to unlock password for this .stx file as link: https://drive.google.com/file/d/1iTpK98 ... sp=sharing

Thanks a lot.

[BDominik2001]

Hello. Could someone assist me? I have a Control Expert Classic v15.3 PLC project for M580 plc. The password to open the project is: Prog@123321. The issue is that the Section & Program Units password is missing from the project. Could someone please assist me in decrypting this?
The project : https://limewire.com/d/VujlB#cjjMi5kbvM

Thanks in advance!

[dennyS]

Hello everyone,
I have trouble with opening a PLC project in Unity Pro XL V11.1.
My grayed code is: 3739.1
Could someone help me open the project?
Project: https://we.tl/t-deL1rAbujo
Thanks much in advance.

[turhanotomasyon]

Hello,
@vlad2006gr First of all, thank you all for your help.

As you mentioned, I've been trying everything with the Hex Editor for two days and I've been unsuccessful. Can you explain this issue to us or to me step by step and help me?
And if possible, could you send me a video about it?
The PLC program I'm using is PL7 Pro V4.5. In my project, the blocks in the program section are locked, and no one knows about this lock, and the person who wrote the program is also dead.

I would be grateful if you could help me with this.

Regards,
Enes