TP 077 PASSWORD

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
Post Reply
kostawr
Posts: 6
Joined: Fri Jun 22, 2012 3:22 pm

TP 077 PASSWORD

Post by kostawr »

Dear all,

I have a TP 77 and I don;t have the user / admin password in order to change the protected parameters, is there any way to recover / bypass the password.

PS : 1. I don't have the original hmi program available.
2. The plc program routines are password protected, so I can;t built a new program for the touch panel

thanks in advance.
cyanid-e
Posts: 9
Joined: Sun Feb 21, 2016 2:46 pm

Re: TP 077 PASSWORD

Post by cyanid-e »

Project download via Prosave, and decoded "Decoder Prosave". And the password will be visible.
yeosh99
Posts: 59
Joined: Thu Jul 14, 2011 4:40 pm

Re: TP 077 PASSWORD

Post by yeosh99 »

Can upload "Decoder Prosave"?
cyanid-e wrote:Project download via Prosave, and decoded "Decoder Prosave". And the password will be visible.
Homeroid_BL
Posts: 258
Joined: Fri Apr 03, 2009 3:24 pm
Location: Bosnia and Herzegovina

Re: TP 077 PASSWORD

Post by Homeroid_BL »

yeosh99
Posts: 59
Joined: Thu Jul 14, 2011 4:40 pm

Re: TP 077 PASSWORD

Post by yeosh99 »

All the links are dead.
Tashkey
Posts: 11
Joined: Wed Jun 09, 2010 10:52 am

Re: TP 077 PASSWORD

Post by Tashkey »

Hello everyone.
Has anyone found a way to decode or bypass the password on the Control Panel?
Post Reply