Address of simotion d params
Address of simotion d params
On some forum, I have seen that the address of tag in this devices look like ANY(10.05.00.01.00.03.84.00.02.10). How can I see this addres in Simotion Scout or simatic manager? For example, I need to read P250 param on Simotion D425 (I use snap7 to do this or WinCC), using STARTER (similar to simotion scout) i can see all the param but without the addres that i mencioned before. Anyone can help me??
-
Draco Malfoy
- Posts: 94
- Joined: Mon Sep 23, 2013 10:41 pm
Re: Address of simotion d params
Dear Sir,
you are completely wrong. The adresses in the format you desribed above, are belonging to the SIMOTION-Tags, witch you declare as "public" and export for example like a Watch-Tab or for using inside of an HMI (TIA or WinCC Flexible). Tags, witch are declared as "private" or "system" you cannot display on HMI or put into a Watch-Tab.
Futhemore, you definitely need the full functionally SCOUT to work with a SIMOTION. Inside of STARTER you can only define the Data Interface to the Drive (i.e. TLG111 + TLG30 or somewhat like that) and make the comissioning of the drive. No more no less.
you are completely wrong. The adresses in the format you desribed above, are belonging to the SIMOTION-Tags, witch you declare as "public" and export for example like a Watch-Tab or for using inside of an HMI (TIA or WinCC Flexible). Tags, witch are declared as "private" or "system" you cannot display on HMI or put into a Watch-Tab.
Futhemore, you definitely need the full functionally SCOUT to work with a SIMOTION. Inside of STARTER you can only define the Data Interface to the Drive (i.e. TLG111 + TLG30 or somewhat like that) and make the comissioning of the drive. No more no less.