[LINK]: key and PLC-driver for PLC-ANALYZER pro 4 or 5

[day2hack]

Hi,
For a training test, I am in need of the PILZ drivers.
pls

[TMS320F2812]

someone who have PLC ANALYZER PRO5 for S7 MPI/Profibus driver.
Pls. upload it again. I need to try use it with S7 MPI/DP.

[slowak1982]

https://mega.nz/#!S9AWjDqJ!NMLCvwp3wez4 ... ZSkQvRYsFw

zip with all drivers, cracked dlls aso

[CoMod]

All Ok
it very old archive from our site

check Mega plugin in your Firefox and dowloaded file

[andifmt]

Hello everyone,
I`m looking for the Phoenix Driver.
Please help.....

[eujuiz]

Even with the settings in the virtual machine is still giving dongle error.
I'll try to take it in the same hand.
I'm using vmware 12

[eujuiz]

I managed to run it on vmware 12 with windows xp, I had to edit a conditional jump inside the program font

[henk]

@eujuiz

I managed to run it on vmware 12 with windows xp, I had to edit a conditional jump inside the program font

Can you explain how to do?

[henk]

@eujuiz

Or may be better, can you share your VMware image?

Thanks

[xflash]

Is PLC-ANALYZER pro 6 cracked available?
For S7-300,S7-400 PLC-analyzer pro 5 works fine. Is there any working cracked PLC-ANALYZER pro 6 ?

https://www.autem.de/download-content/a ... ro%206.pdf
It supports optimized data block access and cycle precise.

It is a pity build-in TIA Trace function could only record 3 minute.

Good luck to all in 2019!

[freddo_Qian]

i am looking for it too

[Sarek]

i am looking for it too

[MORs]

Someone has a crack of Sps-analyzer v6.x???

[MORs]

Pls-analyzer v 5.1, 5.3 works on win 7 & win 10 without VM

[reedcat]

If this is a question, the Analyzer 5.* works with Win 7 32 bit only (on this reason usually runs under VM)

[MORs]

No, it's a fact

[boont]

No ! Pls-Analizer pro v 5 does not work with win7. If you know how to do this, please tell me!
Installation error appears - 1628:Failed to complete installation.

[reedcat]

One more time: PLC Analyzer 5 works under Windows 7 32-bit only and doesn't work with Windows 7 64 -Bit (which is most common). Probably Step7 on that PC also required.

Out of them there is a way to start the Analyzer under virtual machine with Win7 (sure, 32-bit). Read this topic, pls, especially Page2

[boont]

I'm sorry. All right you say. My carelessness )))

[alpesh2111]

PLC Analyzer PRO 5 is working on Windows 10 64 bit...no single issue

[DenSad81]

Good day to all. Can anyone help me?
I have a question.

In Readme standing: Run update 5.1.1 - but i found only 5.1.2. Is this a problem?

If i start the Programm, there was a error message (in german): Bitte legen Sie die Schlüsseldiskette ein oder schließen Sie den Dongle-Key an!

[Einklaus]

Hello and Thanks,
I`m searching for the Logo Driver.
Hope anybody can help me

[Kone]

Assuming I tried to install the program illegally, I might do the following:

0.: Download the cracked software from the Link which is already shared in this forum

1 .: Copy the complete folder (PLC-Analyzer 5) to your computer before you start the installation. Network drives often do not have administrator rights.

2 .: Install the WkRuntime using the administrator rights so that the WKWIN32.DLL and other Wibukey DLLs are automatically preinstalled in the correct storage locations
https://www.wibu.com/de/support/anwende ... tware.html

3 .: Install the PLC-Analyzer 5.0 with the help of the Setup.exe file and administrator rights, which is located in the "Setup" folder, skip the licence-management

4 .: Using the administrator rights, copy the files svcrypt.dll, syczpia.dll to ----> C: \ windows \ syswow64

5 .: Using administrator rights, copy the anawin.exe file to the PLC analyzer folder, which is located in the standard installation under C: \ Programs (86x) \ AUTEM \ PLC-ANALYZER pro 5

5 .: Using administrator rights, copy the driver.dll file to the PLC analyzer folder, which is located in the standard installation under C: \ Programs (86x) \ AUTEM \ PLC-ANALYZER pro 5 \ DRIVER

6 .: Run the update

7 .: Open Anawin and Analyze whatever there is to analyze


Important:
I would not open the anawin.exe before the update has been carried out!
If you would have already made this mistake, you would have to completely uninstall the PLC analyzer.
This is possible with the Revo-Uninstaller program https://www.chip.de/downloads/Revo-Unin ... 91156.html. The corresponding setup file is included.


Of course, all of this is purely hypothetical

Greetings, Kone

[alpesh2111]

Do anybody have SIMOTION driver for PLC analyzer PRO 5?

[reedcat]

I might do the following

Dear friend, you have forget one small thing: on which Windows version(s) your have try this idea?

On my experience the last version is Win 7 32-bit. Till now all attempts to start Analyzer on 64-bit Windows have no result.

[Kone]

Hello, I think this would work based on this hypothetical guide. Even for Windows 10 20H2 64-bit.
The main difference between the 32-bit and 64-bit installation would be the location of the .dll files.
For 32-bit systems, .dll must be copied to system32, for 64-bit systems to SysWow64.
You could also theoretically put the .dll files in both folders and optionally remove any unused .dll from your computer after it works.
You'd just have to make sure that you really have removed all regestry entries from previous attempts before you'd start over...

[S4CABB]

Hello EveryOne
Yesterday I managed to reinstall PLC ANALYZER 5.x on a HOST Windows 10 - 64 Bits without problem following the procedure described above.
Then upgrade to V5.8 latest version available on Autem...
Everything works with more than 10 different PLC Drivers...

Always on top this forum

[busoco]

Thank you for your information. I also just did it successfully .
Can you please give your PLC drivers? I have only 6 drivers that uploaded on this forum.
Thank you in advance.

[S4CABB]

busoco

I send you a private message for these PLC Drivers

[busoco]

Thank you very much for the files.
I will test them on PLC.

[X200881]

Hello. Can you provide a link to a working program. I don't get out. Error "ODBC Runtime error (OxAZZZ)!" and the process hangs in memory. Win7 x64.

[nawrokrz]

Hi all,
I am looking for a driver MITSUBISHI MELSEC Q / A / FX for PLC-Analyzer 5. Can anyone help me, please? Thx.

[X200881]

There is only this https://disk.yandex.ru/d/S_cRhgFE-ZMxfw

PLC-ANALYZER 5
https://disk.yandex.ru/d/E5LvbcvAiNKlGg

[X200881]

Hi all,
I am looking for a driver MITSUBISHI MELSEC Q / A / FX for PLC-Analyzer 5. Can anyone help me, please? Thx.

Does it work PLC-Analyzer 5 for you on windows 10 64? I couldn't launch at all.

[Jia Bing Qi]

hello guys,I need PLC ANALYZER different PLC Drivers,can you give me the all?

after I updated to 5.8, the software can only be used on the day of the update, and once the time passes 24 o'clock, the software cannot be opened and used normally。I wonder how you can do it for unlimited time？