[LINK]: key and PLC-driver for PLC-ANALYZER pro 4 or 5

kaffeemuehle · Post by **kaffeemuehle** » Tue Nov 07, 2006 7:01 pm

i need a key and PLC-driver Siemens SIMATIC S7 for PLC-ANALYZER pro 4 or 5. somebody could help me?
It´s a very bad program and it's not recommended to use it.

for more infomation look here

http://www.autem.de/e_index.htm

================== boycott of autem.de ======================================
About autem.de see viewtopic.php?f=2&p=34070#p34070
In connection with impudent behaviour, threats and blackmail from outside representatives Autem.de, the request to support campaign on the Internet for the purpose of display of force of our community of engineers and programmers.
Do not buy their production. You can download them free of charge and you will see that they really are not necessary to you.
Place negative responses about production of this company, about poor quality of its production and an overcharge on their production.
Blackmail and threats should not remain unpunished.
The program does not represent interest for programmers and servicemen as represents "that that at chiromancy level" - type of "homoeopathy" for "treatment" of problems in cables.
You can use Siemens Amprolyzer V3.2 Bus Monitor - Diagnostic Software for PROFIBUS http://support.automation.siemens.com/W ... n/18818699

Link · Post by **Link** » Thu Nov 16, 2006 8:32 am

Hello,
I have found version 4.013 on this Link :

files.cvalka.net PLC-Analyser pro 4.0.1.3 EN
1.95 Mb
I have tested it with a S5 and it works, to install try the buttons(it`s in Russian), but this cracked version is in English and....German

Link · Post by **Link** » Wed Dec 27, 2006 8:18 pm

kaffeemuehle wrote:Sps-analyzer pro 5 crack before long

Where

Where..Where..??Down Here!:)
First Step:Program: ....plc-analyzer5.zip
Number two step:before long!!!

....PLC_Analyzer_crack_sys_dll.rar

By!
*Leslie*

ppp · Post by **ppp** » Thu Dec 28, 2006 6:37 am

Это только дистрибутив программы без образа ключевой дискеты.
В осле долгое время болтался такой же дистрибутив для версии 4.
Ключа никто не выкладывал. А без него распаковать файлы трудно.
Кто-нибудь знает какие принципиальные изменения в 5 версии?
Вот дрова для других контроллеров не помешали бы.
Ждем продолжений от laszlo...

This is only Program without key floppy image.

lonzo · Post by **lonzo** » Fri Jan 19, 2007 4:52 pm

hello,
@ dekor: here was a crack for analyzer 5, and on Cvalka , but now its disapear, i dont know why? because it works.

See about problem in Cvalka viewtopic.php?p=9722#9722

lonzo · Post by **lonzo** » Sat Jan 20, 2007 10:02 am

Hello,
@ dekor: please wait for for the new crack with all drivers for plc analyzer, the old crack is only for s5 s7 abb and omron, the new is for all plc's, and you need the update from autem, "before long" means "coming soon"

thanks to the admin for help

i think everybody how need this programm every day buy it, but for home use and try it out....

Link · Post by **Link** » Sat Mar 17, 2007 10:33 am

directory Simatic
ab_driver_tcp_1.dll
Autem Driver 5.0.3

s7_driver_ethernet_1.dll
Autem Driver 5.0.4

or (because new problems in CVALKA)

PLC_Analyzer_drivers.rar

kaffeemuehle · Post by **kaffeemuehle** » Sun Mar 18, 2007 4:45 pm

I have a question.

In Readme standing: svcrypt.dll, syczpia.dll, but in File be called syczpia.sys.
Must i rename this File? (I try both)

In Readme standing: Run update 5.1.1 - but i found only 5.1.2. Is this a problem?

If i start the Programm, there was a error message (in german): Bitte legen Sie die Schlüsseldiskette ein oder schließen Sie den Dongle-Key an!

Can someone help me?

Link · Post by **Link** » Sun Mar 18, 2007 4:51 pm

Update version 5.x --> 5.1.1

rapidshare PLC_ANALYZER_up_511.zip

Scowl · Post by **Scowl** » Mon Mar 19, 2007 3:51 pm

All has turned out.
It has appeared not so difficultly as it seemed

Russian wrote:Все получилось. Оказалось не так сложно, как казалось

Thanks

kaffeemuehle · Post by **kaffeemuehle** » Tue Mar 20, 2007 12:14 am

Thanks for 5.1.1, but the same Problem. (Uninstall before)

I try it on a Virtual PC 2007 XP Pro.

it works without error message on the "normal" PC.

Link · Post by **Link** » Sat Apr 07, 2007 5:32 am

qwe911 wrote:Hi, everyone,
Anybody have ANALYZER PRO5 for S7 MPI/Profibus driver? Could you share it? Thanks!!

S7driver+etc..:

rapidshare PLC_Analyzer_crack_sys_dll.rar
Very good!!

Juli · Post by **Juli** » Sat Apr 07, 2007 8:09 am

Today I install the Update 5.1.2 and it works

regards

monty_burns_007 · Post by **monty_burns_007** » Sat Apr 07, 2007 12:13 pm

does anyone have the modbus (serial / ethernet) driver ?
Modbus is used by telemecanique and modicon PLC's...

monty

Gorky75@ · Post by **Gorky75@** » Wed Apr 25, 2007 3:41 pm

Juli wrote:Today I install the Update 5.1.2 and it works

regards

Update 5.1.3 works.Very Good!!

Hy!

New update(5.1.4)!-->new driver

:PILZ

Link · Post by **Link** » Sat Aug 25, 2007 5:21 pm

Please Share PLC Analyzer Crack in Non-Rapid Share Link.

here you have it:

mediafire
Regards

MeDoK · Post by **MeDoK** » Wed Sep 05, 2007 9:00 pm

Update 5.1.4 OK!!

Link

http://www.autem.de/download/up_514.zip

Salut

MeDoK!

Link · Post by **Link** » Thu Sep 06, 2007 1:43 pm

Hi!

Pilz driver for autem5 ver.(5.1.0)

100.25 KB

regards

Link · Post by **Link** » Fri Sep 14, 2007 9:05 am

thanks for sharing

i need driver for:
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus Plus
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus TCP/IP
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus I
SPS-Treiber Schneider Modicon TSX Premium / Atrium / Micro / Nano - TCP/IP / Uni-Telway
SPS-Treiber Schneider AEG TSX A250 / A120 / Micro - PG-Schnittstelle (KS)

lonzo · Post by **lonzo** » Wed Sep 19, 2007 4:53 am

hello,
i'am looking for driver mitsubishi and ad_usb_box.

DimonS · Post by **DimonS** » Sun Oct 28, 2007 5:10 pm

Hi,
Anybody have Beckhoff TwinCAT I/O driver? Could you share it? Thanks!!

Gorky75@ · Post by **Gorky75@** » Sun Nov 11, 2007 7:04 pm

Hi!!

New driver 5.2.0 :Works!!!

ming_tj · Post by **ming_tj** » Mon Dec 10, 2007 2:26 pm

Does anybody have the driver for "Beckhoff TwinCAT I/O"
I use S5, S7 , PILZ and Beckhoff, now only need driver for Beckhoff,
please help.
I can help to calculate the twincat key till "NCI" if someone send me that.

Link · Post by **Link** » Tue Dec 18, 2007 7:15 am

Little_Cat wrote:Beckhoff TwinCAT I/O driver?

Hi!

Autem Beckhoff TwinCat I/O driver 5.2.0:

for russian users

119.71 KB

Works beckhoff driver??!!

Please help: i am search save2pc pro full version program(private message)

Merry Christmas!

2008 new year-->new driver!

Happy New Year!

*Leslie THE KING*

zrfengplc · Post by **zrfengplc** » Wed Dec 19, 2007 3:56 am

Hi!

Autem Beckhoff TwinCat I/O driver 5.2.0:

I can't download.
Please help me.
Thank you very much!

Gorky75@ · Post by **Gorky75@** » Wed Dec 19, 2007 10:53 am

DimonS wrote:ed2k://|file|[Full].save2pc.full.with.Bonus.zip|2058151|D98CB910473C43C2390F95A7A00A6F88|/

Thank You DimonS!!!...This file VIRUS!!..

Please help!!

zrfengplc · Post by **zrfengplc** » Wed Dec 19, 2007 11:31 am

Thank you Gorky75@!!!!!

Merry Christmas!

PeterLustig169 · Post by **PeterLustig169** » Thu Mar 06, 2008 3:45 pm

Hi there,

everytime I try to "unpack" the file PLC_Analyzer_sys_dll.rar i get a message from WINRAR that the HEAD of the file is broken or damaged...can anybody advise me...
I have installed the plc-analyzer5 but it ask for a valid lizens.....

Hope there is some help for me...

Peter

Link · Post by **Link** » Thu Mar 06, 2008 5:16 pm

I have downloaded and unpacked without problems

Try ZIP

rapidshare PLC_Analyzer_crack_sys_dll.zip

PeterLustig169 · Post by **PeterLustig169** » Fri Mar 07, 2008 6:49 am

Today it worked...but the files size was much bigger then yesterday....

BUT IT WORKED :_)

Thanks

raimund · Post by **raimund** » Wed Apr 30, 2008 3:46 pm

Need AD_USB-Box driver for Anapro 5

Thx in advance.

Link · Post by **Link** » Tue May 06, 2008 9:14 pm

Hy!

New update 5.3.0=>OK!!!

http://www.autem.de/download/up_530.zip
21 MB

ivygun · Post by **ivygun** » Sun Aug 24, 2008 4:09 am

Hello,everyone! I am a freshman,I need driver for mitsubishi ,does someone help me ! I can share some document about PLC.

haiersea2000 · Post by **haiersea2000** » Thu Sep 11, 2008 1:27 pm

I can't download File "Pilz driver for autem5 ver.(5.1.0)" from

Pls help me!
thanks very much~

monty_burns_007 · Post by **monty_burns_007** » Wed Sep 24, 2008 7:08 pm

Garog wrote:thanks for sharing

i need driver for:
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus Plus
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus TCP/IP
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus I
SPS-Treiber Schneider Modicon TSX Premium / Atrium / Micro / Nano - TCP/IP / Uni-Telway
SPS-Treiber Schneider AEG TSX A250 / A120 / Micro - PG-Schnittstelle (KS)

I need these drivers too

Can maybe Lesie The king post these ?

thx

Freezer86 · Post by **Freezer86** » Mon Oct 06, 2008 9:53 am

Is there already a Crack for PLC-Analyzer 5.3.1 ???

Or do I have to install the older version?

hon023 · Post by **hon023** » Mon Oct 06, 2008 12:52 pm

I am Waiting for the "all drivers" Crack, but it doesn't exist!
Who have uers&password for "ftp.cvalka.net/"?

kaffeemuehle · Post by **kaffeemuehle** » Mon Oct 06, 2008 8:23 pm

Hello,
need one for "CoDeSys".

Thanks

nene · Post by **nene** » Fri Oct 10, 2008 1:15 pm

this program and the same old commlite ie
it's also the password to see if CLP

frankw · Post by **frankw** » Sat Oct 11, 2008 2:49 am

Freezer86 wrote:Is there already a Crack for PLC-Analyzer 5.3.1 ???

Or do I have to install the older version?

Yes.
install the V5.x
add the crack
make the upgrade 5.3.1

every thing is OK

Freezer86 · Post by **Freezer86** » Fri Oct 24, 2008 5:52 am

I tryed that in a virtual pc by vmware, but it doesn't work.
The sortware doesn't work with the origignal key too.
I think it is a problem with vmware.

tamer12 · Post by **tamer12** » Sat Oct 25, 2008 6:59 am

Thanks for this program.
Please can you uploade the driver for mistsubishi FX series.
Thanks alot

jp2b · Post by **jp2b** » Sat Oct 25, 2008 6:00 pm

please, i would like to find drivers for plc telemecanique premium.
Do you have it?

thank you very much

Vitavox · Post by **Vitavox** » Wed Oct 29, 2008 8:49 pm

As I wanted to test this software before we bought it, I installed the software from this forum including the keys for Autem PLC analyser driver.
It worked very good (I even did the upgrade to version 5.3 without any problem).

We now purchased an official version of Autem PLC analyser,
but it is impossible to uninstall the pathced software from this forum
(software keeps asking to remove Autem PLC analyser keys first,
but I have no way of doing this).
I tried to move the Autem PLC analyser keys to the USB license key,
but then I get the error

"maximum allowed licenses reached"

.
I installed all the Autem PLC analyser keys I could find on this forum
(although I only needed the Siemens ones!?),
but we only bought Siemens licenses,
so even if I could move the keys to the purchased USB key, my problem would still not be resolved.

I already installed the software of this forum on another pc
(to log what changes are made to the registry and on the hard drive, to try if removing the WIBU-key software would help, to install the purchased software over the patched one,.. ),
and tried to manually remove files hoping the keys would be removed also, but so far without success.

I found out some hash files are added in the system32/catroot and system32/drivers that are linked to the keys, but removing them only causes an error but does not resolve my problem...

Does anyone has any clue (without formatting the hard drive...) to get these patched keys back of my pc so I can install the official ones?

Any help would be really appreciated!

Vitavox · Post by **Vitavox** » Thu Oct 30, 2008 7:43 am

The keys for Autem PLC analyser driver.

Vitavox · Post by **Vitavox** » Thu Oct 30, 2008 8:07 am

I also tried to install this software in a virtual machine (XP SP3 in VM Ware workstation).

When I open the Autem "licence key management", I can see all the licences from this forum. However when you try to start the program, an exeption is thrown "Please insert key disk or connect key-dongle to your computer".

I guess the patch does not work on a virtual pc for some reason...

graf_STEP7 · Post by **graf_STEP7** » Wed Dec 24, 2008 4:20 pm

Hi

Have anybody Driver for CoDeSys ?

Please share it.

Thanks

lorenzo · Post by **lorenzo** » Wed Jan 07, 2009 5:10 pm

I'M NOT ABLE TO INSTALL THE LICENSE KEY

SOMEONE CAN HELP ME?

TANKS A LOT
LORENZO

lorenzo · Post by **lorenzo** » Thu Jan 08, 2009 8:48 pm

yeah
On desktop PC, PLC analyzer it is OK.
On laptop PC, when I run the program by double click on icon, nothing happens..progam does not open.

All License seem to be pesent on PC and updated to 5.3.1 version.

Any idea?

Thank's a lot

Ruslan.UA · Post by **Ruslan.UA** » Wed Jan 21, 2009 9:13 am

I've no problems on laptop. I think it may happend if you have Vista OS, check settings for this application (set administration rights or WinXP compatible mode).

PLCforum.uz.ua

[LINK]: key and PLC-driver for PLC-ANALYZER pro 4 or 5

[LINK]: key and PLC-driver for PLC-ANALYZER pro 4 or 5

PLC Analyzer

http://www.cvalka.com

Re: ANALYZER PRO5 for S7 MPI/Profibus driver

modbus driver

Pilz autem5

new driver for autem

need "Beckhoff TwinCAT I/O driver" for Analyzer

Problems with PLC_Analyzer_sys_dll.rar

it worked

New update

modbus drivers

PLC-Analyzer 5.3.1

PLC-ANALYZER pro

Re: PLC-Analyzer 5.3.1

Re: PLC-Analyzer 5.3.1

Mitsubishi Driver

Impossible to uninstall

PLC ANALYZER KEY