[?+]: unPassword Library in ABB Compact Control Builder

Shinengel · Post by **Shinengel** » Fri Jan 25, 2013 9:13 pm

Hi Linkinx64!

Would you mind in helping me to get a password for CraneAdvancedLib? I do have the same library file, but in different projects:

https://skydrive.live.com/redir?resid=3 ... xbMV8eGcRY

PS: The CCB version is 5.0.2/3 (5.0 SP2)

Linkinx64 · Post by **Linkinx64** » Sat Jan 26, 2013 6:10 pm

Shinengel wrote:https://skydrive.live.com/redir?resid=3 ... xbMV8eGcRY

Copyrighted.

vnnghia_bk · Post by **vnnghia_bk** » Wed Feb 06, 2013 3:23 am

"You can't see these functions because they are hidden - it become visible after enter the password. Password is correct."

Hi Linkinx64!

How can I see the hidden program?In other way, how can I undhide the program?

Thanks and Best regards!

Linkinx64 · Post by **Linkinx64** » Sun Mar 10, 2013 9:34 am

yxxyun wrote:can i know the ControlAdvancedLib-1-4-4 password in cbm 5.1?

Code: Select all

7y65ere4SUyU

iatsiman · Post by **iatsiman** » Sat Mar 16, 2013 5:44 pm

Hi Linkinx!
Would you be so kind to help me with this?

AlarmEventLib 1.5-9
ControlAdvancedLib 1.4-5
ControlBasicLib 1.2-4
ControlExtendedLib 1.3-3
ControlSimpleLib 1.2-3
ControlSolutionLib 1.2-3
ControlStandardLib 1.4-7
ControlSupportLib 1.3-5
SignalBasicLib 1.1-4
SignalLib 1.6-9
SignalSupportLib 1.1-5
SupervisionLib 2.5-6

Is it good to copy PIDs to own library?
I am afraid of system update.

yishe133 · Post by **yishe133** » Mon Apr 15, 2013 11:19 am

could you please help me to get password for these four libs
thanks
http://www.4shared.com/rar/_fzw0-M4/__2_.html

asen · Post by **asen** » Wed Apr 24, 2013 1:23 pm

Hello Linkinx64,
Could you please help me unpassword in following zip?
http://plcforum.uz.ua//abc.zip
Thank you.

cnCraneBasicLib
cnCraneStandardLib
cnGrabControlLib
cnGsuAutoLib
cnGsuBasicLib

Linkinx64 · Post by **Linkinx64** » Fri May 03, 2013 6:39 pm

There are no .lbr files in the "abc.zip"

asen · Post by **asen** » Sun May 05, 2013 4:22 am

Linkinx64，Thank you,I have re-upload the file, Thanks again. ccb v5.0.2/2
http://plcforum.uz.ua//hello.zip

Linkinx64 · Post by **Linkinx64** » Sun May 05, 2013 4:25 pm

asen wrote:Thank you,I have re-upload the file, Thanks again. ccb v5.0.2/2
http://plcforum.uz.ua//hello.zip

Copyrighted

qft0337 · Post by **qft0337** » Sat May 18, 2013 5:31 pm

Hi Linkinx64,
ABB just released Pcd5.7 & Pce3.2,Can you unpassword PCDevice5.6 & 5.7 & PCEquipmentLib 3.2.
Thanks advanced.
9ARD123797-250_-_en_System_800xA_Process_Control_Device_Library_5.7-0.zip
9ARD123797-251_-_en_System_800xA_Process_Control_Equipment_Library_3.2-0.zip
PCDeviceLib 5.6.zip

Ale_x3 · Post by **Ale_x3** » Sat May 18, 2013 6:03 pm

Hello Linkinx64!

Could you please give the password for the three libr inside

https://dl.dropboxusercontent.com/u/105 ... ib_321.rar

(these are library from twincat 2 - codesys, I think is the same as ABB libr, since is always codesys, Isn't it ?)

Thanks in advance

!!

Linkinx64 · Post by **Linkinx64** » Mon May 20, 2013 2:00 am

qft0337 wrote:Hi Linkinx64,
ABB just released Pcd5.7 & Pce3.2,Can you unpassword PCDevice5.6 & 5.7 & PCEquipmentLib 3.2.
Thanks advanced.
9ARD123797-250_-_en_System_800xA_Process_Control_Device_Library_5.7-0.zip
9ARD123797-251_-_en_System_800xA_Process_Control_Equipment_Library_3.2-0.zip
PCDeviceLib 5.6.zip

Great contribution!

Check private messages!

Ale_x3 wrote:https://dl.dropboxusercontent.com/u/105 ... ib_321.rar

(these are library from twincat 2 - codesys, I think is the same as ABB libr, since is always codesys, Isn't it ?)

Yes, it is.
For all libraries:
Read password: BOLTZHEN9*
Write password: KINGFEI0\

yishe133 · Post by **yishe133** » Mon May 27, 2013 10:40 am

Hi Linkinx64
Could you please help me get the password in following file
thanks
http://www.4shared.com/rar/BgdZARVa/newfolder.html

stenull · Post by **stenull** » Wed May 29, 2013 1:51 pm

This is excellent Linkinx64!!
Me to is in need of unlocking a ABB lib. This library is driving me crazy!

I've PM you a link to it Linkinx64. Your definitely my hero!

Linkinx64 · Post by **Linkinx64** » Wed Jun 05, 2013 8:15 pm

yishe133 wrote: Could you please help me get the password in following file
thanks
http://www.4shared.com/rar/BgdZARVa/newfolder.html

Code: Select all

rmcSystemLib 5.0-1: rmcSystem2204
rmcHsiSystemLib 1.0-1: rmcHsiSystem7932
rmcHsiAdvancedLib 2.0-0: rmcHsiAdvanced0901
rmcHSILib 4.1-1: rmcHSI7815
rmcPecSystemLib 5.0-3: rmcPecSystemLib1846

ssynchro wrote:I need your help. I need to unpassword library.

http://www.4shared.com/archive/DuVr1XnN/Libraries.html

Code: Select all

DML_soft: ffbkbk
MWM: ffbkbk

Linkinx64 · Post by **Linkinx64** » Sat Jun 08, 2013 11:03 pm

Try:

Code: Select all

AlarmEventLib	1.4-6	gVvHrt6i9eu
BasicGraphicLib	1.1-1	6748675gFR
ControlStandardLib	1.3-5	fpRcYniAfr
ProcessObjBasicLib	2.3-5	uJBVFRTlju

It must working for you libraries too (fback)

stenull · Post by **stenull** » Mon Jun 10, 2013 7:20 am

Request:)
AlarmEventLib 1.6-0

nola2k · Post by **nola2k** » Tue Jun 11, 2013 4:11 pm

@Linkinx64

Hi, is it possible please:

BMIStandard 1.5-17
BMIAdaptions 1.5-13
BMISupport 1.5-11
BMIConstAndVar 1.5-15

Thanks in advance
nola2k

stenull · Post by **stenull** » Wed Jun 19, 2013 7:54 am

AlarmEvent 1.4-6 password works on 1.4-8
ControlStandardLib 1.3-5 password works on 1.3-8
ProcessObjBasicLib 2.3-5 password works on 2.3-7

Linkinx64 · Post by **Linkinx64** » Sun Jun 30, 2013 12:22 pm

nola2k wrote:@Linkinx64

Hi, is it possible please:

BMIStandard 1.5-17
BMIAdaptions 1.5-13
BMISupport 1.5-11
BMIConstAndVar 1.5-15

@nola2k
I don't have this version of BMI.

prawnk · Post by **prawnk** » Wed Jul 03, 2013 7:41 pm

@Linkinx64
Plz help me to unpassword these libraries :

ABBQCS-3-1-0
ABBQCS_AG-3-1-0
ABBQCS_DR-3-1-0
ABBQCS_DS-3-1-0
ABBQCS_EN-3-1-0
ABBQCS_HB-3-1-0
ABBQCS_LC-3-1-0
ABBQCS_MD-3-1-0
ABBQCS_MS-3-1-0
ABBQCS_SG-3-1-0
ABBQCS_SM-3-1-0
ABBQCS_SP-3-1-0
ABBQCS_SQ-3-1-0
PP_ElementLib-1-1-0
PP_FunctionLib-1-1-1

here the file : http://www.4shared.com/rar/CLKqqLWC/QCS1.html

Thx in Advance
Prawnk

Linkinx64 · Post by **Linkinx64** » Thu Jul 04, 2013 1:15 pm

prawnk wrote:@Linkinx64
Plz help me to unpassword these libraries :

ABBQCS-3-1-0
ABBQCS_AG-3-1-0
ABBQCS_DR-3-1-0
...
PP_ElementLib-1-1-0
PP_FunctionLib-1-1-1

here the file : http://www.4shared.com/rar/CLKqqLWC/QCS1.html

Passwords for these libraries cannot be published. See PM for the details what's a disaster shit happened...

prawnk · Post by **prawnk** » Fri Jul 05, 2013 12:03 am

@Linkinx64

thanks

Best Regards
Prawnk

krst · Post by **krst** » Wed Aug 07, 2013 4:43 pm

Hello,

Could you help me with unlock of password protected user library for Control Builder M for 800xA ver. 4.1.
In case yes, which exactly file do you need - xxx.lbr?
I found only one lbr but the name differ from the library name in the project.

Linkinx64 · Post by **Linkinx64** » Wed Aug 07, 2013 5:51 pm

Hello,

yes, I need .lbr file + folder:

E.g. user library in CBM has name "UserLib".
I need: UserLib-1-0-0.lbr file and L_UserLib-1-0-0 folder both.
Upload that on any file hosting where I can download it for free :: I will unpassword it (if it is not violent any copyright but your).

krst · Post by **krst** » Mon Aug 19, 2013 11:13 am

Hello,

Here is the link with User Library files - I forgot the password for it. Could you please send me the password

http://www.4shared.com/rar/XEM05qCv/GTS.html

krst · Post by **krst** » Mon Aug 19, 2013 11:14 am

Hello,

Here is the link with Library files. Please send me the password for it

http://www.4shared.com/rar/XEM05qCv/GTS.html

Linkinx64 wrote:Hello,

yes, I need .lbr file + folder:

E.g. user library in CBM has name "UserLib".
I need: UserLib-1-0-0.lbr file and L_UserLib-1-0-0 folder both.
Upload that on any file hosting where I can download it for free :: I will unpassword it (if it is not violent any copyright but your).

Linkinx64 · Post by **Linkinx64** » Tue Aug 20, 2013 5:33 am

krst wrote: http://www.4shared.com/rar/XEM05qCv/GTS.html

The file link that you requested is not valid.

krst · Post by **krst** » Tue Aug 20, 2013 7:33 am

Or this link contains the same files

http://www.4shared.com/rar/TtOf6CUv/GTS_1.html

Linkinx64 · Post by **Linkinx64** » Tue Aug 20, 2013 9:59 am

krst wrote: http://www.4shared.com/rar/TtOf6CUv/GTS_1.html

The GTS library is not protected. It consist on one FB. Even that block is in error state :

krst · Post by **krst** » Tue Aug 20, 2013 7:56 pm

Thanks Linkinx64,

It seems I sent wrong files. But this is currently running system so the library could not contains errors.
In preview I can see that you open the library, even the variables are with "our" names and comments. Amazing !
Could you please advise typical place where the project and library are saved in 800xA - the files that are running and you need.

I saved from following location:
C:\ABB Industrial IT Data\Engineer IT Data\Control Builder AC 800M\Projects

Just long time ago I put a password for application and library in order to protect them from operating staff.
Now in CBM they could be open as read only but no modifications are possible.
Unfortunately forgot the password - it should contains 3448 but also some letters.

May be to send to you application / programs also. Where to get this files from - in 800xA they are not exactly visible in folder like in Compact CBM.

Linkinx64 · Post by **Linkinx64** » Wed Aug 21, 2013 6:56 am

Default location for CBM projects, ver 3.2: C:\ABB Industrial IT Data\Engineer IT Data\Control Builder M Standard 3.2\Projects
But library can be located in a different place. To save the current version of library somewhere right-click on it in CBM project explorer and select "Save Copy As..."
Make project backup to ensure all required libraries being included (Tools -> Maintenance -> Project Backup...).

krst · Post by **krst** » Wed Aug 21, 2013 10:40 am

Hi again,

In 800xA the libraries are not saved/visible as .lbr files. Description below is valid for Compact CBM but these commands are not available in CBM for 800xA. It seems the libraries are integrated somewhere in the system folders.

I made a Export of the needed library (name: gtss) from plant explorer, Import/Export tool. Here is the link for export file:

http://www.4shared.com/file/LfFmR18H/file1.html

Could you check if possible to import and unpass the library. For this I think running empry system is needed.
Do you have some other ideas?

Linkinx64 wrote:Default location for CBM projects, ver 3.2: C:\ABB Industrial IT Data\Engineer IT Data\Control Builder M Standard 3.2\Projects
But library can be located in a different place. To save the current version of library somewhere right-click on it in CBM project explorer and select "Save Copy As..."
Make project backup to ensure all required libraries being included (Tools -> Maintenance -> Project Backup...).

Linkinx64 · Post by **Linkinx64** » Wed Aug 21, 2013 12:53 pm

krst wrote:I made a Export of the needed library (name: gtss) from plant explorer, Import/Export tool. Here is the link for export file:

http://www.4shared.com/file/LfFmR18H/file1.html

That's more like it!
Let me see what you placed as a password...

Code: Select all

ca4399bm

P.S. Yes, the library in PPA stored in the aspect directory. But because you first uploaded .lbr file I was thinking you are using standalone Control Builder M (compact version).

krst · Post by **krst** » Wed Aug 21, 2013 1:13 pm

Many, many thanks !
Really great help

Kirk_an · Post by **Kirk_an** » Tue Aug 27, 2013 8:50 pm

Hello,

Could you help me with unlock of "AlarmEventLib 1.2-3" library for Control Builder M for 800xA ver. 4.1.
I am interested in function block AlarmCond funcionality.
Does anyone know the pass or do I need to send the lib file to crack it?

Thanks

Linkinx64 · Post by **Linkinx64** » Sat Aug 31, 2013 12:42 pm

Kirk_an wrote:Could you help me with unlock of "AlarmEventLib 1.2-3" library for Control Builder M for 800xA ver. 4.1.
I am interested in function block AlarmCond funcionality.
Does anyone know the pass or do I need to send the lib file to crack it?

You didn't specified subversion of Control Builder M (version of AC 800M Connect feature).
E.g. AC 800M Connect v 4.1.0-6 includes AlarmEventLib v1.2-6.
However you can try password from AlarmEventLib v1.2-6 for v1.2-3. It can work.

AlyssaChia · Post by **AlyssaChia** » Fri Sep 20, 2013 8:39 am

why your version of the libraries are outdated?

the latest version of 800xA is FP4, and my software version is FP3.

Linkinx64 · Post by **Linkinx64** » Fri Sep 20, 2013 5:15 pm

Whose libraries?

AlyssaChia · Post by **AlyssaChia** » Mon Sep 23, 2013 8:10 pm

The password of libraries you get, I take a chance on trying in my system and the password was wrong. I found that my libraries are higher than yours.

And I try the license. I modified the Machine ID to "DEMO", the license entry told me that the CIV check wrong, but last year I saw a engineer modified the license because the license contained much useless information, and the license was right to import.......

but I add a space it will told me the CIV check is wrong...

Linkinx64 · Post by **Linkinx64** » Tue Sep 24, 2013 4:03 am

AlyssaChia wrote:I found that my libraries are higher than yours.

If the library version not the same as the specified in my posts then there's no wonder that you can't unlock it - password is different.

AlyssaChia wrote:And I try the license. I modified the Machine ID to "DEMO", the license entry told me that the CIV check wrong, but last year I saw a engineer modified the license because the license contained much useless information, and the license was right to import....... but I add a space it will told me the CIV check is wrong...

License file content modification is possible after installing "bypass license file" only. However it is permitted to add as many spaces as you want inside the file - the License Entry program will ignore all of them when runs CIV checkout.

sdcwhy · Post by **sdcwhy** » Mon Oct 21, 2013 12:35 pm

Dear all
Please help unpassword
http://www.4shared.com/zip/SasCQHVE/lbr.html

thanks

qft0337 · Post by **qft0337** » Sun Nov 10, 2013 6:16 am

Hi all,
ABB PCdevice 5.8 and Pce3.3 already released.Can you unpassword them.
BR.
http://www.4shared.com/zip/TXFwCmek/9AR ... m_800.html
http://www.4shared.com/zip/R7X_HFE7/9AR ... m_800.html

fpramanik · Post by **fpramanik** » Sun Nov 10, 2013 2:11 pm

Dear all,
I am new in ABB AC800m and I have installed IIT 800xA v 5.1 Rev b in my 64 bit OS laptop as Single engineering Node.Installed procedure was automatic.
But when I want to create a new object in control structure, "Control System" object Types not found.

Please help me

Regards
Farid Pramanik

Link · Post by **Link** » Sat Nov 16, 2013 1:30 pm

sdcwhy wrote:Please help unpassword
http://www.4shared.com/zip/SasCQHVE/lbr.html

thanks

Reply to sdcwhy:

Show

Code: Select all

cnCraneBasicLib: Impreza1234Basic
cnCraneStandardLib: Impreza1234Standard
cnGrabControlLib: Impreza1234Grab
cnGsuAutoLib: Impreza7709Auto
CraneTpsLib: Martenshamn

---------------

qft0337 wrote:Hi
ABB PCdevice 5.8 and Pce3.3 already released.Can you unpassword them.
BR.
http://www.4shared.com/zip/TXFwCmek/9AR ... m_800.html
http://www.4shared.com/zip/R7X_HFE7/9AR ... m_800.html

Reply to qft0337:

Show

Code: Select all

PCDeviceCoreLib 5.8-0, PCDeviceGraphicsLib 5.8-0, PCDeviceLib 5.8-0 and PCDeviceSupportLib 5.8-0: Lotus5802
PCEquipmentLib 3.3-0, PCFacilityLib 3.3-0 and PCFacilitySimLib 3.3-0: Mirella330

---------------

Reply to stenull:

Show

Code: Select all

SeqStartLib 1.3-0: PÃþvòXVjöCôÙ5ÍÏTÑþDÈÈæIÌxÁÛTrÆrÃÃhak

stenull · Post by **stenull** » Sat Nov 16, 2013 5:44 pm

Thanks Link, how could you know...

qft0337 · Post by **qft0337** » Tue Dec 10, 2013 11:59 am

Hi Linkinx64,
Can you help me to unpassword AGALibrary?
http://www.4shared.com/zip/oQPk1_0-/AGALibrary.html
Thanks advance.

Linkinx64 · Post by **Linkinx64** » Fri Dec 20, 2013 7:55 am

qft0337 wrote:Can you help me to unpassword AGALibrary?
http://www.4shared.com/zip/oQPk1_0-/AGALibrary.html

Code: Select all

O1P2P4T5A7G0A

qft0337 · Post by **qft0337** » Wed Dec 25, 2013 4:34 pm

Hi Linkinx64,
Can you unpassword Minerals Libraries for FP4 version.
Min Liz CN09(Minerals Libraries AC800 5.1.4).iso
Best Regards.