[?+]: unPassword Library in ABB Compact Control Builder

[smb]

How can I open password protected library in ABB compact control builder AC800M?I don't have password of library.

[Linkinx64]

Hi smb

I can find password for CB password-protected library.
Please upload library or tell library name + version (in case you want to know password from standard library).

password example: Tcaцrmqo62

Please pay attention to some cyrillic symbols in password - you can get cyrillic symbols from Windows character map:

[Linkinx64]

It''s library folder which has license.

http://plcforum.uz.ua//L_BLib-1-0-0.rar

There are no library file. The CCB library file should have .lbr extension.
Plz, upload L_BLib-1-0-0.lbrThis file normally located in the same folder where you got L_BLib-1-0-0.

By the way: tell me the CCB version you use to open this library.

I didn't find any file with *.lbr extenstion.The software which I use is "Compact Control Builder AC 800M version 5.0.0/0".

It should looks like this:



The file icon may be different (I use CCB v5.1.0-0).
File name should be: BLib-1-0-0.lbr

Yes,I found it.

http://plcforum.uz.ua//BLib-1-0-0.lbr
http://plcforum.uz.ua//B ... -1-0-0.lbr

This library has dependency from BoilerLib:



The password from BoilerLib-1-0-0: indgidej

When I enter the password.it seems it's correct.But I couldn't open the library and I got the following page.

http://plcforum.uz.ua//page.rar

What's my problem?

I can't see any functional block in BoilerLib
Plz upload folder L_BoilerLib-1-0-0 also
Or maybe whole Library folder (C:\ABB Industrial IT Data\Engineer IT Data\Compact Control Builder AC 800M\Projects\Libraries).

http://plcforum.uz.ua//L ... -1-0-0.rar

There are many standard libraries: BasicLib, IconLib, ControlStdLib etc.
Actually, right name for that - system libraries.
Which of those system libraries password you want to know?

ControlSimpleLib 1.0-10 password: b45927gFB

[Linkinx64]

I open "PiecewiseLinearReal" in "ControlSimpleLib 1.0-10" with your password.I find two another function "PiecewiseLinearCalc" and PiecewiseLinearInverse" in it. How can see inside of these functions?

These functions are defined in ControlSupportLib. You have to unprotect ControlSupportLib 1.1-6 using password: Tcaцrmqo62
Please pay attention to 4th symbol (cyrillic charmap) in password - you can get it from Windows character map:


After unprotect ControlSupportLib you'll be able to see PiecewiseLinearCalc and PiecewiseLinearInverse by rightclick, Go to PiecewiseLinearReal->In Editor.

It seems the password is not correct.In addition I don't see these two functions under ControlSupportLib 1.1-6.

You can't see these functions because they are hidden - it become visible after enter the password. Password is correct.

I right click on ControlSupportLib and select Properties->Protection and I got the following picture.
When I enter the password.
I got "Invalid password" message.

[url=hhttp://img825.spamm.us/img825/9793/pswccp.gif][/url]

Ok, I know what's goin' on:

Make the follow change in Windows regional settings: Add RUSSIAN language support


Insert Windows XP installation disc (if required), restart PC and try again.

It works.
Thank you.

[Linkinx64]

How can I remove password from standard library?

System libraries password cannot be removed because these libraries have both attributes - "secured" and "released".
These attributes can't be conjunctively applied for user library.

[Linkinx64]

What's the password of "BasicLib 1.4-9"?

That was quite difficult
Password is : HUULДЦЕW
where ДЦЕ are from cyrillic. As we discussed - type it using character map.
or HUULÄÖÅW

[Linkinx64]

Basic Lib 1.5-7 PLS

Password is: weiKgytfcn7

[Linkinx64]

i need password for "abb-bib4.lib" in 907 ac 1131....

http://plcforum.uz.ua//abb-bib4.lib

Could you tell us which software you used to open this file? This file doesn't seems a Compact Control Builder library...

[brave_eagle]

Maybe is AC31GRAF or 907AC1131

[Linkinx64]

Finally I've downloaded it (AC1131).. viewtopic.php?f=3&t=8905&p=21001 Much more time spent for download rather than for the RE-search.

i tried to open with 907ac1131 and codesys 2.3 and was prompted with a password-popup...

When opening abb-bib4.lib type in password-popup: sst_ts_kb2 and click OK.

it works!!!!!

thank you for your efforts!!!

[Linkinx64]

Hello,
if possible, I need password for following libraries:

- ControlBasicLib 1.1-4
- ControlSimpleLib 1.1-2
- ControlStandardLib 1.3-8
Theese are part of RevD 800xA AC800M Connect installations.

Thanks in advance.

Code: Select all

ControlBasicLib 1.1-4: 35UjhGsVkp
ControlSimpleLib 1.1-2: 2gyHDreQA
ControlStandardLib 1.3-8: fpRcYniAfr
ControlSupportLib 1.2-2: yPUg56FE

[Linkinx64]

Yes it's ControlBasicLib 1.6-9. I will try to bring it with me and send it..i'm just not sure will be only export from the Lib structure enough
Best Regards!
Would it be possible also for ControlBasicLib 1.6-9 and ControlStandardLib 1.4-6

Are you sure "ControlBasicLib" has 1.6-9 version?
ControlStandardLib 1.4-6: hjHghgdfddbg

[Linkinx64]

I have CCB 5.1
And i´m pretty sure he is referring to basiclib not to control basiclib

I adjoined to his request. I need pass for:

AlarmEventLib 1.5-8
BasicLib 1.6-9
ControlBasicLib1.2-3
Control SimpleLib 1.2-3
ControlSUpportLib 1.3-4

Thanks in advance

Code: Select all

AlarmEventLib	1.5-8	J589544gfcBfB
BasicLib	1.6-9:	Hasiw834ghYiU
ControlBasicLib	1.2-3:	IopVmLkt54drB
ControlSimpleLib	1.2-3:	bvfr56788iJM
ControlSupportLib	1.3-4:	ttkllues545gB

[Linkinx64]

It would be possible to unPassword the

SystemLib
MMSCommLib 1.3-4
ModBusCommLib 1.3-3
ModBusTCPCommLib 1.2-4

Any detailed procedure to unPassword with the Olydbg would be appreciated

Thanks in advance

Code: Select all

System : kdY73kjdkl
MMSCommLib 1.3-4 : rGHVBG67535
ModBusCommLib 1.3-3 : Dsavxcmhjyrt
ModBusTCPCommLib 1.2-4 : 9nhfDFdfjkghRj

[Linkinx64]

It would be possible to unPassword the

Basiclib 1.3-3
ControllStandardlib 1.2-4

thanks

System version 4.1.0-6 ?

Code: Select all

Basiclib 1.3-3: g620gG
ControlStandardLib 1.2-4: KOURcdG

[Linkinx64]

can I got the password for the two custom libraries contained in following zip?
http://dl.dropbox.com/u/15190010/CBM4.1Libraries.zip

Code: Select all

MacroLib: MacroABBEAAC800M7067
MacroLibDefaults not protected

[puppy75]

Hello again,
Is possible to obtain password relatedto three libraries included in following zip?
http://dl.dropbox.com/u/15190010/PCdeviceLibs.zip
Thank in advance

[Linkinx64]

I just installed the new Compact Control Builder version 5.1.0/1.

The previously posted passwords for BasicLib no longer work.

I would like to know the new password for BasicLib 1.6-10.

I don't have Compact Control Builder version 5.1.0\1.
Very strange... It usually not happen between the revisions, only between versions... Probably protection was changed...

Could you share the software to let me check?

It's been 2.5 months since you got Compact Control Builder version 5.1.0/1.

Were you able to reveal the password for BasicLib 1.6-10?

See answer in PM

[puppy75]

Hello again,
Is possible to obtain password relatedto three libraries included in following zip?
http://dl.dropbox.com/u/15190010/PCdeviceLibs.zip
Thank in advance

I remember in this thread a reply about this request....but seems deleted...?

[Linkinx64]

I remember in this thread a reply about this request....but seems deleted...?

More exactly: here was a reply and the request about BMI libraries to upload.... All gone
Actually, is it make any sence for you if you already got the password for

http://dl.dropbox.com/u/15190010/PCdeviceLibs.zip

?

P.S. Can anyone contribute BMI (Minerals Library) for 800xA 5.1?

[mandichi]

Hi Linkinx64,

Could you please help me unpassword below file
http://www.megaupload.com/?d=SA0GXDES

Thank you and Best regards.

[Linkinx64]

please help me unpassword below file http://www.megaupload.com/?d=SA0GXDES

Code: Select all

CraneAdvancedLib: Akterspegel
CraneBasicLib: Helljuset
CraneLpsLib: Kronprinsessa
CraneMathLib: windmill
CranePE1373: SkitKey01
CraneStandardLib: Avgaserna
CraneTpsLib: svenskadagbladet

How's about to upload folders L_CraneBasicLib-1-0-0, L_CraneStandardLib-1-0-0 etc. for the files above?

[Linkinx64]

Code: Select all

ControlAdvancedLib	1.3-4	q3321mGDe
ControlExtendedLib	1.2-3	IjuyGDE69
ControlObjectLib	1.1-5	nfRDKi78wn
ControlSolutionLib	1.1-4	FGdcGOW
MMSCommLib	1.2-13	hwoHF56VTg
ModBusTCPCommLib	1.1-2	MjiJSAQ54y
ModBusCommLib	1.2-2	JHfg65DSWbH

[Linkinx64]

Can you help me get the password of the lib:http://www.megaupload.com/?d=D0JC8078

Here your passwords:

Code: Select all

MineHoistAppLib: cie5W9jice
MineHoistBasicLib: uVCa3TvYNp
MineHoistBrake: hn8u87wfKF
MineHoistPosLib: DanielDummy

[Linkinx64]

In pursuit:http://www.megaupload.com/?d=Y745VPK9

This will work:

Code: Select all

AHLib	olofbriljerar
AHLib0	orvar626
AHLib1	arne726
AHLib2	bertil036
AHLib3	curt536
AHLib4   daniel246
AHLib5	erik156
AHLib6	fredrik266
AHLib7	gustav576
AHLib8	henrik096

Who all these people?

[hina]

Dear Linkinx64,

Do you have a SupervisionLib 2.4-4?, because i have the project with AC800 Compact Control Builder Professional version 5.0.2/2
after i check on the library there is no SupervisionLib 2.4-4 on Compact Control Builder Professional

Please advice

[Linkinx64]

Dear hina

The SupervisionLib (as well as some other system libraries) is not presented in compact version of Control Builder, only in Control Builder M (that's a part of 800xA System).
You need install 800xA SV5 SP2 or later version, then restore project made in CCB 5.0.2/2 (actually, made in 800xA's CBM and exported to compact version).
To restore compact project in Control Buider M use Tools >> Maintenance >> Compact CB >> Open From Compact CB Format.

Regards

[Linkinx64]

It would be possible to unPassword the controlsimplelib 1.0-4

Code: Select all

jKgafJK

[Linkinx64]

the CommunicationLib 1.0-0

Code: Select all

CpiwkK7653

[puppy75]

Linkin', sorry for delaying in my replay, but unfortunately I lost your posted password
Can you send me again the password of that libraries?
I link you the new place for the lib: https://dl.dropbox.com/u/15190010/PCDeviceLib.zip
Thank a lot!

[Linkinx64]

sorry for delaying in my replay, but unfortunately I lost your posted password

Go look for where you lost it

[Linkinx64]

Could you post the pass for
SignalLib 1.6-9 library

You don't need this really.

[Linkinx64]

Can you help me get the password of the lib:rcrTechnoGenLib-5-0-2.lbrrcrTechnoSystemLib-5-0-1.lbrrdDriveGenLib-1-0-0.lbrrdDriveSystemLib-1-6-0.lbrrfmDriveGenLib-5-0-2.lbrrfmDriveSystemLib-5-0-0.lbrrfmMdrLib-5-0-0.lbrrfmSystemLib-5-0-1.lbr

Wait until I find my crystal ball...

crystal ball ? what is it?

sounds very interesting!

Esoteric method of password revealing using crystal ball:


I think classic reveal password methods are still actual and easier than the supernatural. Isn't it?

[amit_sabby]

sorry for misunderstanding...here is the link for library for which i need password thank you.

http://dl.dropbox.com/u/36769999/rfmSystemLib-5-0-1.rar

thanks azhw

[Linkinx64]

http://dl.dropbox.com/u/36769999/rfmSystemLib-5-0-1.rar

Code: Select all

rfmSystemLib 5.0-1: rfmSystemLib1872
rfmDriveSystemLib 1.6-0: rfmDriveSystemLib312
rfmDriveGenLib 1.0-0 not protected
rfmMdrLib 5.0-0 not protected
rdDriveSystemLib 1.6-0: rdDriveSystemLib3127
rdDriveGenLib 1.0-0 not protected
rcrTechnoSystemLib 5.0-1: rcrTechnoSystemLib74
rcrTechnoGenLib 5.0-2 not protected

[amit_sabby]

thank you very much, you solved my four year old head nagging...it works wonder

[azhw]

very great!
Linkinx64 is really a genius, and a helpful and respectable man!

I wonder what method Linkin64 used to find the password so fast and exact?
you have a keygener? use ollydbg ? or using some bug of CCB itself?

[Linkinx64]

I use Ollydbg + special conversion and decryption software (developed by myself).
There's nothing genious in unpassword libraries. I think everyone who have target, patience and basic knowledge of asm and c++ can do the same...

[Linkinx64]

I need the password of SerialCommLib 2.1-2

Code: Select all

hgcfgdjhgGF47v

[st_e_fan]

This post with the crystal ball makes my day!!!
Thanks for the good humor!!
Now i"m pointing to my subject - i need the password for the Fort Knox Bullion Depository. Please help!

[Linkinx64]

i need the password for the Fort Knox Bullion Depository. Please help!

I will start to process your request as soon as the Ecuadorean embassy established in my town


Picture: Julian Assange gave a defiant statement from a balcony at the Ecuadorean embassy in London.
Source: http://www.telegraph.co.uk

[amit_sabby]

http://dl.dropbox.com/u/36769999/WINDER-1-0-0.rar

i would like to have your service again.
please i need password for few libraries in link given.

thanks for your last posting. it is really helpful.

[puppy75]

You don't need this really.

Hi Linkinx64, can you post the pass anyway for this lib? We need it....

[iatsiman]

Hello Linkinx64!

Could you please give the password for SupervisionBasicLib 1.1-7 ?
Thanks in advance.

[Linkinx64]

This system library is protected using the latest encryption algorithm. See PM.

[drgry]

Hello Linkinx64

Would it be possible to unlock these libraries:

http://depositfiles.com/files/7yfoitq2y

Thanks in advance

[Linkinx64]

http://depositfiles.com/files/7yfoitq2y passwords

Show

ControlSimpleLib:

Code: Select all

Frsimp3g

ControlSupportLib:

Code: Select all

prSupllz

rdDriveSystemLib:

Code: Select all

rdDriveSystemLib3127

rdSystemLib:

Code: Select all

rdSystemLib1872

rdTechnoSystemLib:

Code: Select all

rdTechnoSystemLib740

rmcSystemLib:

Code: Select all

veronika

Do you have rd libraries for the 800xA 5.x (with a graphic aspects)?
Anybody can upload it?

[power2l]

Hello Linkinx64!

Would you be willing to provide the passwords for the following library files?

CraneStandardLib-1-0-0.lbr
CranePE1373Lib-1-0-0.lbr
CraneCableReelLib-1-0-0.lbr
CraneBasicLib-1-0-0.lbr
CraneAdvancedLib-1-0-0.lbr

https://dl.dropbox.com/u/81530526/CraneLib.zip

Thank you!

[Linkinx64]

Would you be willing to provide the passwords for the following library files?

CraneStandardLib-1-0-0.lbr
CranePE1373Lib-1-0-0.lbr
CraneCableReelLib-1-0-0.lbr
CraneBasicLib-1-0-0.lbr
CraneAdvancedLib-1-0-0.lbr

https://dl.dropbox.com/u/81530526/CraneLib.zip

Can you please upload folder for the CranePE1373Lib? It must be in the same directory and has name L_CranePE1373Lib-1-0-0.

[power2l]

Thank you Linkinx64, here is a link to the folder you requested.

https://dl.dropbox.com/u/81530526/L_Cra ... -1-0-0.zip