[?] Visam Win32 dongle crack

[boson2k]

hi,

have someone a dongle crack for Visam Win32 ?
or mayby for an older version.
it use the hardlock dongle.


thanks so much
boson2k

[Link]

Visam 667

http://www.share-online.biz/download.php?id=5E7503CB

[gregar]

Visam 667

http://www.share-online.biz/download.php?id=5E7503CB

Эта страница содержит загружаемый файл с трояном.
При попытке перейти на нее об этом сообщает антивирус Касперского.


This page contains a downloadable file with a trojan.
When you try to move it reported by the Web-Kaspersky Anti-Virus.

[orionbb]

this not right. the is no trojan insights the image und the image works.

[boson2k]

hello,

sorry for late answer, but i have for month no inet.
in the version you have posted is only the ultra light free
have you a dongle crack for this version?
for light and pro version you need a hardlock dongle.


thanks for help
boson2k

[orionbb]

the pro version was cracked and need no more the dongle.
if you need the visam version 9 please say it.

[Vansdan]

Hello orionbb,

regarding your above mentioned offer for the pro version I would like ask you if you could share the software with me?
Thank you for your answer in advance.

Best regards
Vansdan

[boson2k]

hello orionbb,

i tested the version, but so far i remember, the pro version ask for the dongle, but i will test it again to be sure with my statement.
but i would be very thankfull, if you share the cracked version 9


thanks so much
boson2k

[boson2k]

@orionbb

i am so sorry for my statement.
i tested it again and the pro version works fine without dongle.
i think it caused by a previous installation. after complete uninstall and cleaning the reg it works.

thanks so much and sorry again
bosonk

[Vansdan]

Hello boson2k

which version did you try? Did you try the above mentioned version from orionbb or have you tried an other version?

Thank you for the answer.

Vansdan

[boson2k]

@vansdan

yes, i used the version above.
but i hope, that orionbb will share the version 9, because it have a .net converter.

boson2k

[Link]

Visam 9.00.0007
VisAM Win32 Online (VOK) PRO+
change the file

http://www.share-online.biz/download.ph ... U61KSKR2GZ

[Vansdan]

@ orionbb

Thank you for upload the new version but there is still one question.
Which file should i change. I tried to overwrite the file of the 6.67 Version which you have uploaded (this version works... - thanks!) but there wasn´t any changing in the program.

Thank you for the answer

@ boson2k

Thank you for your fast reply!!

[boson2k]

hello orionbb,

i can´t explane how happy i am. thank you, thank you so much!
i don´t have the version 9.00.0007. the only version 9 i could download was 9.0.3(latest at the moment) and the file also works.
but in this version(first time use), i can´t find the .net converter(seem´s it was not active under "project--> send to .net target", only "receive" was active).
then, i try something crazy. i uninstall the 9.0.3 and install the 8.4.9, copy the file from you and.....it works TOO!!!
seem´s it works also with all version 8.
but! this was only a software test, without a plc.
i will test it at the weekend with 2 plc´s and than i would post my results.
but i am sure, that it will work also.

again...thank you so much

boson2k

[orionbb]

ok download the VisAM (HMI / SCADA) DEMO Version
www.visam.de
und then replace the VisAMVOK.exe

[Vansdan]

@ orionb

Thank you for the answer, it works fine.

@ boson2k

Thank you so much for uploading the file!

[Vansdan]

Hello orionbb,

I don´t have the version 9.00.0007 and so I would like ask if you could upload this version to rapidshare? This would be very helpful for me!

Thank you in advance.
Best regards

Vansdan

[THE_DBX]

The link is not valable.
Can you give me a new link

Many thank's!!!!

[Link]

Visam 9.01.0004
VisAM Win32 Online (VOK) PRO+
change the file and have fun

http://www.share-online.biz/download.php?id=TU76J0ALXIN

[THE_DBX]

thank's

[THE_DBX]

Thank's again but nothing running correctly....
I have try with different version of ViSAM, but it's already the same thing.

Have you another version or the right version of you files?

Many thank's again...

[Le_Helma]

Could someone please post a working link to the newest VisamVok.exe again? The links above aren´t working anymore

Thank you very much in advance!

[crash0r]

Does anyone have the files mentioned above?
Maybe even those for new Dot.NET Pro?

Pls help me. Thanks