[?]: DC master 6RA70 S00 option carck

[amit]

Anybody have idea how to crack DC master 6RA70 S00 option ( pin) i.e. dependent on sr no of drive

Amit

[EarL.Yu]

I want it too.

[phoompat]

Yes,I have

[phoompat]

read eeprom 25128 edit

add = 3ff4, 3ff5,3ff6,3ff7
00h = 00 , 00 , 00 , 00 = 0000000/3600 = 0 hr
500h = 40 , 77 , 1b , 00 = 1800000/3600 = 500 hr
1000h = 80, ee, 36, 00 = 3600000/3600 = 1000 hr
1500h = c5 , 65 , 52 , 00 = 5400005/3600 = 1500 hr
2000h = 00 , dd , 6d , 00 = 7200000/3600 = 2000 limited

sumchack

[Add 3FE1 Add 3FE0] = [add3FE3 add3FE2]+[add3FE5 add3FE4]+[add3FE7 add3FE6]+[add3FE9 add3FE8]+
[add3FEB add3FEA]+[add3FED add3FEC]+[add3FEF add3FEE]+[add3FF1 add3FF0]+
[add3FF3 add3FF2]+[addXXXX addXXXX]+[addXXXX addXXXX]+[add3FF9 add3FF8]+
[add3FFB add3FFA]+[add3FFD add3FFC]+[add3FFF add3FFE]

EXAMPLE 1
6E 00 , 3B 3C , 01 0B , 00 DD , 6D 00 , 05 00 , 02 00
006E + 3E3B + 0B01 + DD00 + 006D + 0005 + 0002 = 1271E
1 _ 271E
[Add 3FE1 Add 3FE0] = 1E27

[amit]

Not understood properly ...Please elaboarte in detail.

Thanx
Amit

[phoompat]

read eeprom by

http://www.lancos.com/ppwin95.html

edit data address

[phoompat]

defalt at 500 hr
address 3ff4 = 40
address 3ff5 = 77
address 3ff6 = 1b
address 3ff7 = 00

edit is 2000 hr

address 3ff4 = 00
address 3ff5 = dd
address 3ff6 = 6d
address 3ff7 = 00

and edit check sum by

Address 3FE1 = ??+??+??+?? (from read data)
Address 3FE0 = ??+??+??+?? (from read data)

[gomoura]

How do I place this reading, I have to take the eprom or is otherwise

[gomoura]

read eeprom 25128 edit

add = 3ff4, 3ff5,3ff6,3ff7
00h = 00 , 00 , 00 , 00 = 0000000/3600 = 0 hr
500h = 40 , 77 , 1b , 00 = 1800000/3600 = 500 hr
1000h = 80, ee, 36, 00 = 3600000/3600 = 1000 hr
1500h = c5 , 65 , 52 , 00 = 5400005/3600 = 1500 hr
2000h = 00 , dd , 6d , 00 = 7200000/3600 = 2000 limited

sumchack

[Add 3FE1 Add 3FE0] = [add3FE3 add3FE2]+[add3FE5 add3FE4]+[add3FE7 add3FE6]+[add3FE9 add3FE8]+
[add3FEB add3FEA]+[add3FED add3FEC]+[add3FEF add3FEE]+[add3FF1 add3FF0]+
[add3FF3 add3FF2]+[addXXXX addXXXX]+[addXXXX addXXXX]+[add3FF9 add3FF8]+
[add3FFB add3FFA]+[add3FFD add3FFC]+[add3FFF add3FFE]

EXAMPLE 1
6E 00 , 3B 3C , 01 0B , 00 DD , 6D 00 , 05 00 , 02 00
006E + 3E3B + 0B01 + DD00 + 006D + 0005 + 0002 = 1271E
1 _ 271E
[Add 3FE1 Add 3FE0] = 1E27

How is this conversion?

[phoompat]

Need to solve the Visiting hours are 2000 hours.
because, 2000 hour => 7200000 sec =>( 00 , dd , 6d , 00 ) ==> unlock 200 hour
but, After hours and change to change sumcheck with the calculation of the reading.

sol
Take the reading from the eprom location in sum

[add3FE3 add3FE2]+[add3FE5 add3FE4]+[add3FE7 add3FE6]+[add3FE9 add3FE8]+
[add3FEB add3FEA]+[add3FED add3FEC]+[add3FEF add3FEE]+[add3FF1 add3FF0]+
[add3FF3 add3FF2]+[addXXXX addXXXX]+[addXXXX addXXXX]+[add3FF9 add3FF8]+
[add3FFB add3FFA]+[add3FFD add3FFC]+[add3FFF add3FFE]

EXAMPLE 1
[add3FE3 add3FE2] = 6E 00
[add3FE5 add3FE4] = 3B 3C
[add3FE7 add3FE6] = 01 0B
[add3FE9 add3FE8] = 00 DD
[add3FEB add3FEA] = 6D 00
[add3FED add3FEC] = 05 00
[add3FEF add3FEE] = 02 00
[add3FF1 add3FF0] = 006E
[add3FF3 add3FF2] = 006E
[addXXXX addXXXX] = 3E3B // fix value
[addXXXX addXXXX] = 0B01 // fix value
[add3FF9 add3FF8] = DD00
[add3FFB add3FFA] = 006D
[add3FFD add3FFC] = 0005
[add3FFF add3FFE] = 0002

6E 00 , 3B 3C , 01 0B , 00 DD , 6D 00 , 05 00 , 02 00
006E + 3E3B + 0B01 + DD00 + 006D + 0005 + 0002 = 1271E

Therefore, the values that have to put 271E

[Add 3FE1 Add 3FE0] = 1E27

Usage save file to fix that and then be loaded into the same place.

[gomoura]

good day ..

reading the EEPROM would be in direct drive, or would it take to read the external EEPROM

[phoompat]

eprom is not in the control card.
Remove the control card.

[gomoura]

Could you explain, I could not understand, then it would be right on the rack 6RA70

[phoompat]

http://plcforum.uz.ua//CrackS00.rar

[gomoura]

Good Morning

Could you pass this explanation to content .. I would doubt if I get online directly with the rack or the Simoreg have to get the external component to read ...

[phoompat]

http://www.lancos.com/siprogsch.html

looking base board and SPI eeprom adapter for eprom 25128

[ciwa]

http://plcforum.uz.ua//CrackS00.rar

Hi phoompat, please re-link this file.

Regards

[phoompat]

https://rapidshare.com/files/452457144/CarkS00.rar

[angelo]

https://rapidshare.com/files/452457144/CarkS00.rar

it can not download now

[sinmaster12]

Phoompat

Plz upload the crack file again...

[amit15177]

Dear Amit , do you want to dammage drive?