[LINK]: PL7-2 Software

[Applied666]

Looking for a copy of the PL7-2 DOS software for programming a TSX17 PLC.

Thanks in advance

[ngoc]

Software of TSX 17 is: Xtel+ PL7-2 in OS/2 Warp V3.0 OS of IBM.

[MareBlu]

Hi,Applied666.
In my archive I've found this old application for TXS17 under DOS.

pl72.zip



Passw.: onlyforplcnetru_:)_

But don't tellme something about it because I don't remember how it works. ( I've used it more than 15 years ago last time....)

[ngoc]

Hopefully it can help for your job.
(I download from Internet, I don't test)
http://plcforum.uz.ua//O ... 2_Full.rar

[ahmadhaseeb]

The rapidshare link is not working someone upload the software

[leofarhan]

If anyone have PL7-3 & ORPHEE with crack please upload.

I have APRIL Orphee dongle, but it is not working.

Thanks

[Link]

This is PL7-07 v4
Work is only Win98, NT
http://plcforum.uz.ua//PL707_v4.rar
Good luck!

[venix]

Thank you!

It worked for me with the TSXPCX1031 cable.

Best regards!
Venix

[ebadi]

hi
The rapidshare link is not working someone upload the software.

thanks in advance

bestr egards

[Lepes9]

Hi there,


I need also PL7-2 for DOS.
Does anybody has this software?
Can anybody upload/re-upload it? (The old links don't work any more.)



Greets
Lepes9

[grnick50]

Dear All,

I am trying to find a piece of software that performs pl7-2 to pl7 conversions. This Scheneider Electric software is documented in document: w913293990301a_k01_000_02
As TSX17 is a legacy product cable & software are hard to find. If one has the native *.bin file form PL7-2 he can convert to PL7 and form there if needed to Unity Pro.

Does anyone have this software?

Regards!

[valero]

pl7 for DOS
http://plcforum.uz.ua//pl7-2.zip
XTEL fo DOS
http://plcforum.uz.ua//xtel.zip
Cable TSX
http://plcforum.uz.ua//22Ibmtotsx.pdf
Cable for TSX 47,67,87,107
http://www.niplex.com.au/OperatorPanels ... /ca103.zip

[Lepes9]

Many thanks, valero!


Greetings
Lepes9

[mutant]

Can anybody upload these files again?

[vlad2006gr]

Download is FTP
ftp://81.136.231.145/Old%20PLC%20Softwa ... 26%20PL72/
Good luck!

[mutant]

Thanks, vlad2006gr. But I did not understand, now I have to find Xtel v6 ? Or enough that you gave me?




Best regards!

[vlad2006gr]

Relink.
https://www.rapidshare.com/files/1124822946/XTELV61.ZIP
Good luck!

[rapter]

TSX 17 pc to plc cable wiring please...

[mutant]

Thanks a lot!

Best regards!

[mutant]

TSX 17 pc to plc cable wiring please...

Maybe this link will help you http://plcforum.uz.ua//Cables_tsx.zip

Best regards!

[JanRigo]

How to install PL7-2?? setup.exe writes: "This program cannot be run in a DOS session". I have win XP

[MareBlu]

You have to use old standalone msdos like msdos v5

[frederico_jpm]

Hi everyone.

Can someone share again PL7-2 software?
I need to program TSX Micro 17.

Thanks.

[nazidade]

Hi
if your win98 is installed, you can do a quick and simple installation PL72 =>
you must copy the file three (TE_BOOT, XDOSPRJ, XDOSSYS) link on the root C: \
then you call the pl7-2 by PL72 TE_BOOT shortcut in the folder.
link:
http://www.sendspace.com/file/40kstw

[pit6]

Can someone share the programming sw for TSX17 and cable diagram?
I need to something change in program TSX Micro 17

Thanks

[blito1991]

Hello to everyone and sorry for reopen this post... I want to access to a Telemechanique TSX17 with PL7-2 software. Regrettably, I've found one link from rapidshare (recently closed). Can anyone send me another link where i could download it??

Thanks a lot!!!

[oquintanilla]

The file name is not visible obvious reasons version is 5.1 PL7 2, 3 EXE Zip Files can you verify with zip program... If you Download Seed on other host file please
https://mega.nz/#!xZAgmDgA
Best Regards

[sintespain]

Anybody have a copy of pl7-2 software?? I need it to do a backup copy.

I think the old links doesn't works

Thanks

[alireza136110]

plz reupload.
thanks

[Seneko]

Good day to all!!!

Please re-upload the software PL7-2 for DOS.

I have very old PLC TSX17 2 4012 and need to retrieve the program from eeprom.
I have installed the DOS 6.22 in VMware player but the version of the program I have seems wrong as during installation the errors occur.

Appreciate for any help,

[darick]

Hello! Please share the program under Dos for tsx17 programming. All links do not work already (.

[m_ghaff2000]

I need TSX17 software (TL 7 for DOS or WIN) immediately!!
The Rapidshare links do not work!!
Please help me !1
Manyy Thanks

[aldan4uk78]

Hi,
can anybody give a working link to PL2-7 software? Thanks.

[Daniel_Brasil]

Hello,

Check link below.

https://www.mediafire.com/file/x57pzqs8h2jumgt/file

Password: plcforum


best regards

[aldan4uk78]

Thanks!

[val_pilats]

Reupload programming cable for TSX47-20 please.

[itanyi]

HI!
The links are died... Please reupload PL7-2 - DOS.
Thank You in advance! ISTA

[SanPedro_]

Can anyone please reupload the PL7-2 for DOS software?
I really need it.
Thank you.

[hmohamed]

pl7 for DOS
Link_is_Dead /files/444484002/pl7-2.zip
XTEL fo DOS
Link_is_Dead /files/444484213/xtel.zip
Cable TSX
Link_is_Dead /files/444591011/22Ibmtotsx.pdf
Cable for TSX 47,67,87,107
http://www.niplex.com.au/OperatorPanels ... /ca103.zip

all links are dead can you reupload?

[tiagours]

I need the Software to open the PL7-2 to open plc programs with model TSX1723428E. Can someone help me?