[?]: wincc and s7-200 communication

ilhano1978 · Post by **ilhano1978** » Sat May 09, 2009 9:10 pm

hello everyone

i have PPI cable (usb) for s7-200 .
how am i communication s7-200 and wincc.??

best regards

votuandktd · Post by **votuandktd** » Mon May 11, 2009 3:26 am

ilhano1978 wrote:hello everyone

i have PPI cable (usb) for s7-200 .
how am i communication s7-200 and wincc.??

best regards

You need PC Access to connect between WinCC and S7-200.
WinCC <-(OPC)-> PC Access <-(PPI)-> S7-200

auto_mitch · Post by **auto_mitch** » Sat May 23, 2009 9:21 am

I have already tested with PC Access and it works fine. Also you can try with KepWare Server with S7-200 Driver.

dijital · Post by **dijital** » Fri Jul 03, 2009 8:28 pm

you can try with KepWare Server with S7-200 Driver. I worked it. it is fine

waqas_here · Post by **waqas_here** » Wed Aug 12, 2009 3:30 pm

Where i can download KEPWARE. Plz upload the link

XMAS · Post by **XMAS** » Wed Aug 12, 2009 5:16 pm

Link from forum

KEPServer EX v4.270.416
http://plcforum.uz.ua//KWEX4270416.rar

Cheers

XMAS

waqas_here · Post by **waqas_here** » Sun Aug 16, 2009 5:45 am

Thanks for the software. I have successfully made the connection using kepware. Now tell me how to interface these tags in wincc

auto_mitch · Post by **auto_mitch** » Sun Aug 16, 2009 3:52 pm

i will upload asap an insert tags guide from Kepware

waqas_here · Post by **waqas_here** » Mon Aug 17, 2009 1:38 pm

Thanks in anticipation for uploading insert tag guide.

auto_mitch · Post by **auto_mitch** » Mon Aug 17, 2009 2:50 pm

Photo guide "Wincc tags insertion from Kepware opc server"
http://plcforum.uz.ua//W ... epware.rar

PLCforum.uz.ua