[?]: CP342-5 - Communication with S5 and OP37

Luiz_felipe · Post by **Luiz_felipe** » Fri Jun 12, 2009 3:53 pm

Hello

I would like to know if someone could help me with the following questions .

Must share a CPU S5 6ES5-095-8MB03 with CP 345-2 6GK7-342-5DA01-0XE0,
I said it was possible via Profibus FDL , I would like to know how ??

And also I am having trouble communicating with an OP37 a CP345-2.
someone who has done these types of application could help me?

CPU -> 6ES5-095-8MB03
CP -> 6GK7-342-5DA01-0XE0
OP37 -> 6AV3 637-1LL00-0FX1

If you can help, thank you!

Umencho · Post by **Umencho** » Mon Jun 15, 2009 6:46 pm

CPU -> 6ES5-095-8MB03
CP -> 6GK7-342-5DA01-0XE0
OP37 -> 6AV3 637-1LL00-0FX1
Hello,

You hardware configuration is uncompatible.

You have S5 CPU and S7 CP.
6GK7-342-5DA01-0XE0 - CP 342-5 COMMUNICATIONS PROCESSOR FOR CONNECTING SIMATIC S7-300 TO PROFIBUS, DP, S5-COMPATIBLE PG/OP AND S7 COMMUNICATION RECEIVE INTERFACE AND S7 FUNCTIONS

6ES5-095-8MB03 - SIMATIC S5, S5-95U COMPACT UNIT WITH PROFIBUS INTERFACE

Regards

Luiz_felipe · Post by **Luiz_felipe** » Tue Jun 16, 2009 7:21 pm

Umencho !!

Consulted on the possibility of doing this is communication with the Technical Hotline SIEMENS of my country, and they told me that this application can be made !!

send you a PM with a link as an example that was ready passed by the technical SIEMENS!

Umencho · Post by **Umencho** » Wed Jun 17, 2009 10:09 am

Hello Luiz,

So, this example is not like your issue. There you have IM308C in Step5 side and S7-300. Anyway if we use this example, you could connect OP37 via MPI to S7-CPU on one side and using CP342-5 to connect to S5 CPU.

Regards