[?]: Cable and soft for connection VIPA PLC

simontew · Post by **simontew** » Thu Jun 25, 2009 9:07 am

Hi All,

I need to connect to VIPA PLC 224.
I have the download cable for S7-200.
Can I use the Microwin software with the S7-200 PPI cable to connect to VIPA PLC?
Please advice.
Thanks.

Post by **CoMod** » Thu Jun 25, 2009 9:56 am

Not.
You can use GREEN cable (RS232 COM port) see viewtopic.php?t=4104&highlight=green
and software WinPLC viewtopic.php?t=7501&highlight=vipa
or Step7 v5.4 + VIPA GSD files for programming
I know only Russian link
http://www.cta.ru/cms/f/382077.pdf

Russian wrote:Конфигурация модулей VIPA с помощью ПО STEP 7 Simatic Manager
Татьяна Кузьмина
стр.86
В данной статье даётся ряд рекомендаций по работе с ПЛК VIPA с помощью программного обеспечения STEP 7 Simatic Manager от Siemens.

Post by **Schtiel** » Thu Jun 25, 2009 9:58 am

You should use Step7 and green cable, also you should download GSD-files for your PLC. How to connect to Vipa from Step7 is described here.

simontew · Post by **simontew** » Thu Jun 25, 2009 1:03 pm

Hi All,

Is "Green Cable" just a RS232 cable without any converter IC??

Pls advice. Thanks

Post by **sania** » Thu Jun 25, 2009 1:10 pm

yes,but do not connect with the cable any MPI connector!

simontew · Post by **simontew** » Fri Jun 26, 2009 8:36 am

Hi All,

it works.

thanks all support.

TaaviM8 · Post by **TaaviM8** » Mon Jun 14, 2010 5:01 pm

sania wrote:yes,but do not connect with the cable any MPI connector!

It causes some trouble?

*currently seeking for glues of my trouble with green cable

TaaviM8 · Post by **TaaviM8** » Mon Jun 21, 2010 5:11 am

basically i said bye-bye to MPI port by connecting MPI and "green cable" together.

PLCforum.uz.ua

[?]: Cable and soft for connection VIPA PLC

[?]: Cable and soft for connection VIPA PLC

Re:

Re: Re: