[?]: OPC, Visual Basic 6, AutomationDirect 05 PLC

[servodude]

Hi plc.net.ru,

I am currently working on a sample program that I am going to post in this forum that uses Visual Basic 6 for the HMI, an AutomationDirect 05 PLC , and "TopServer" (SoftwareToolbox) OPC server.

A couple of years ago I built an entire injection molding machine with these components, but now I am making it MUCH easier to understand and use.

A couple of my goals with this project are:
1) Port the VB6 software in VB.NET
2) Use Kepware OPC (because that is available on this forum)

If you are interested in learning more about this project, or you have some ideas on what may make it better, feel free to post here or just PM me.

I want to thank all of those who have taken the time to read through all of this.

servodude

[Nedjeljko]

please take a look to my post. viewtopic.php?f=3&t=14711&p=42134#p42134 ..I have one plant where all project made with (think is VB) VB or some code editor. Please if you can help me with this to open code of project. I need to read out code to understand all parameters and logic for new project.

[davidsk2001]

yes, i do interested to port my old vb6 project to .net platform but i had change to C#.

i also communicate interface using OPC but to different PLC.