[?]: ANALOG SIGNAL WITH CP1W-AD041

macminh · Post by **macminh** » Tue Jul 21, 2009 1:53 am

i have a problem with analog signal input.
My analog signal input's load cell is 4-20mA, 0-10V.
In my ladder programmer i had written analog input as:

Code: Select all

MOV #80ED input ClO 102 and 
MOV #8000 input ClO 103.

(I used CP1W-AD041).
But i don't know how can i read analog input converted value.
You can help me.
And if i change my load input (0 -10000kilo) how can i write my ladder programmer so that the value scale is correct.

macminh · Post by **macminh** » Sat Jul 25, 2009 6:53 am

nobody help me?

Post by **sania** » Sat Jul 25, 2009 8:33 am

try in this rus forum http://cpu13.ru/forum/index.php
for translate use translate.google or babelfish.yahoo

most · Post by **most** » Sun Jul 26, 2009 5:31 pm

sania wrote:try in this rus forum http://cpu13.ru/forum/index.php
for translate use translate.google or babelfish.yahoo

or this with the same translator
http://www.infoplc.net/Ejemplos/Ejem_Om ... alado.html

macminh · Post by **macminh** » Mon Jul 27, 2009 1:30 am

sania wrote:try in this rus forum http://cpu13.ru/forum/index.php
for translate use translate.google or babelfish.yahoo

thank you for reply, but the language is not english .i don't understand

macminh · Post by **macminh** » Mon Jul 27, 2009 1:42 am

most wrote:
sania wrote:try in this rus forum http://cpu13.ru/forum/index.php
for translate use translate.google or babelfish.yahoo
or this with the same translator
http://www.infoplc.net/Ejemplos/Ejem_Om ... alado.html

thank you for reply.but the language isn't english so i don't understand.
you can upload for me some examples or some websites to i can understand more

macminh · Post by **macminh** » Mon Jul 27, 2009 2:33 am

most wrote:
sania wrote:try in this rus forum http://cpu13.ru/forum/index.php
for translate use translate.google or babelfish.yahoo
or this with the same translator
http://www.infoplc.net/Ejemplos/Ejem_Om ... alado.html

you can explain to me why choose the channel of photo sensor is 2001 and the value of channel is 07C1 hexa
If my analog signal is loadcell not photo sensor, i'll can choose the channel is 2001 .

macminh · Post by **macminh** » Mon Jul 27, 2009 2:46 am

if i use CP1W-AD041, how can i choose the channel and the value of channel when i use SCL(194) intruction.

itran · Post by **itran** » Fri Aug 21, 2009 9:02 pm

Please don't say no one help you!
Send me an e-mail let me know what you would like to do with your program. AD041 you need to open this channel with your program assignment.

macminh · Post by **macminh** » Thu Sep 10, 2009 3:52 am

itran wrote:Please don't say no one help you!
Send me an e-mail let me know what you would like to do with your program. AD041 you need to open this channel with your program assignment.

my email: macminh2309@gmail.com
thank you for reply.