[?]: VBA for WinCC

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
vankhoakmt
Posts: 7
Joined: Mon Sep 14, 2009 2:22 pm
Location: Vietnam

[?]: VBA for WinCC

Post by vankhoakmt »

Hi all !

can you send me documents or VBA programming curriculum for WinCC, I want to learn about VBA program for workers in the Graphics Designer objects such as images, buttons or toolbar.
can you help me.? Thanks a lot. :D
Top
greg2008
Posts: 54
Joined: Mon Jul 28, 2008 9:06 am
Location: Russia

Post by greg2008 »

you can find this document on disk with wincc. Wincc 6.0 on cd #2, winCC 7.0sp1 with document you can download from official site or see link on this site
Top
vankhoakmt
Posts: 7
Joined: Mon Sep 14, 2009 2:22 pm
Location: Vietnam

Post by vankhoakmt »

can you tell me the name of the document or link to download ?
thanks very much . :D
Top
nelle
Posts: 1
Joined: Tue Oct 13, 2009 12:47 pm
Location: Europe

About VBA

Post by nelle »

Forget VBA in WinCC, because is working only for design mode. In runtime you must use standard scripts VB and C. Sorry!

I use iFix 10 years with VBA scripts, but I am dissapoined with WinCC VBA.
Top

Return to “SIMATIC HMI”