Hi all
anybody have a sch on cable for connect PC to Siemens Micromaster inverter (for upload a parameters) I have a OP, but this is very lazy work thanks!
[?]: cable to upload parameters on Micromaster
-
Luca_Brasi
- Posts: 4
- Joined: Sat Sep 12, 2009 6:39 am
- Location: Europe
-
Umencho
- Posts: 508
- Joined: Mon Jul 16, 2007 12:28 pm
- Location: Europe
Hello,
You have to Purchase a PC inverter kit (6SE6400-1PC00-0AA0) to use RS232 port of drive, or you can use terminal 29 and 30 on I/O module But then you will required a RS 485 to RS 232 converter.
Look at https://www.automation.siemens.com/WW/f ... anguage=en .
This converter also protect your PC from possible damage.
Hope this will helps.
Regards
You have to Purchase a PC inverter kit (6SE6400-1PC00-0AA0) to use RS232 port of drive, or you can use terminal 29 and 30 on I/O module But then you will required a RS 485 to RS 232 converter.
Look at https://www.automation.siemens.com/WW/f ... anguage=en .
This converter also protect your PC from possible damage.
Hope this will helps.
Regards
-
Luca_Brasi
- Posts: 4
- Joined: Sat Sep 12, 2009 6:39 am
- Location: Europe
I find this sch for RS 485 to RS 232:
http://aquaticus.info/files/RS485%20to% ... ematic.png
This week i will make this and report result
http://aquaticus.info/files/RS485%20to% ... ematic.png
This week i will make this and report result
-
crack_x01
- Posts: 92
- Joined: Mon Sep 05, 2005 6:54 am
- Location: Europe
What is the voltage Vcc?Luca_Brasi wrote:I find this sch for RS 485 to RS 232:
http://aquaticus.info/files/RS485%20to% ... ematic.png
This week i will make this and report result
regard
-
most
- Posts: 431
- Joined: Sat Oct 22, 2005 7:17 am
- Location: Europe
7805 = 5 Vcrack_x01 wrote: What is the voltage Vcc?
regard
about rs232/485
some projects and link in http://www.edaboard.com/ftopic71311.html
(need register)
-
Pokajy
- Posts: 25
- Joined: Mon Apr 07, 2008 3:53 pm
- Location: Turkey
Re: [?]: cable to upload parameters on Micromaster
I'm using this:
