[?+]: Schneider Electric TSXCRJMD25 pinout

[ccoral]

Hello!

I bought the Schneider Electric TSXCUSB485 converter but I don't have the TSXCRJMD25 cable (RJ45 <> mini-din) to connect to the plc. Anyone have this cable? What's the pinout?

Thanks in advance.

[most]

et voilá

[ccoral]

many thanks most!

[ahmedganainy]

IS there shortcircuit between 1-8 in RJ45 side
can you made it more obvious
sorry, if i appear stubid
thanks in advance for your help

[most]

can you made it more obvious

see the photo (front view, side of the pin)

din rj45
1-------------------1
3-------------------3
4-------------------4
5...................5
6...................6
mass ............mass (if exist in your rj45)

do not forget, you need TSXCUSB485 converter

[ahmedganainy]

numbering of RJ45 is not like the standard you start from the next side aren't you?

[most]

numbering of RJ45 is not like the standard you start from the next side aren't you?

who said that I used the standard numbering only I made draw and numbered it.
see, for you the numeration of the plug din that i use is standard is not
see the photo,turns the plug for you with clip for top.
if you have doubt, is preferable to buy the cable TSXCRJMD25 in Schneider Electric

[ahmedganainy]

many thanks
i appreciate your help
really i am sorry if i annoied you i was confused .

[most]

verifies if it is more explicit

[navidentezari]

TSXCRJMD25 cable (RJ45 <> mini-din) to connect TSXCUSB485 converter to the plcs :
Permium & Micro & Nano & Naza & Twido


RJ45 Mini DIN8
PMC 3--------------------------------------5 PMC
D(B) 4--------------------------------------1 D(B)
D(A) 5--------------------------------------2 D(A)
NDE 6--------------------------------------4 NDE
GND 8--------------------------------------7 GND

Mass----------------Mass (if exist in your RJ45)

http://entezari.persiangig.com/TSXCRJMD25.jpg


Best regards;
Navid Entezari
Control & Instrumentation Engineer