Request: Proficy ME 5.5 or 5.6 (or both)

[Str3atWarrior]

Hi,

If someone have a copy of Proficy Machine Edition 5.5, or 5.6, could you please share it?

Thanks

Str3atWarrior

[Schtiel]

Just wonder, why do you need these quite old versions?

Proficy Machine Edition 5.5:
http://plc.net.ru/viewtopic.php?f=3&t=6186

Proficy Machine Edition 5.6:
http://plc.net.ru/viewtopic.php?f=3&t=7846

[Str3atWarrior]

Thanks a lot!

I needed 5.6 because a client of ours have some 90-30 that have been programmed with ME 5.6 and he doesn't want to upgrade to any other version, since he have a 5.6 license on his workstation that he use for monitoring purpose, so i wanted to install a copy of 5.6 on a laptop to be able to do troubleshooting in front of the control panel.

Str3atWarrior

Edit : I mean Machine Edition 5.6 Software installed, and GE is charging and incredibly high price to update to 6.0, and since 5.6 does the job, he doesn't want to pay up more than needed...

[Str3atWarrior]

The 5.6 links are dead, could someone upload it again please?

Edit : Just found new links online :

http://plcforum.uz.ua//P ... .part1.rar
http://plcforum.uz.ua//P ... .part2.rar
http://plcforum.uz.ua//P ... .part3.rar
http://plcforum.uz.ua//P ... .part4.rar
http://plcforum.uz.ua//P ... .part5.rar
http://plcforum.uz.ua//P ... .part6.rar

Not tested, downloading right now, will confirm if working soon

[Str3atWarrior]

The 5.6 links are good one, just burn the files and you're ready to go!

Looking for 5.5 on rapidshare, will post if i find it!

[minstermann]

I have 5.6 also (yea, it's old) but i need a key for ME PLC and ME View (both running on same computer). Site code is ECF8-DDE2. Thanks

[anwer shahzad]

hi minstermann

you see PM

from

Anwer Shahzad

[Hexados]

Just wonder, why do you need these quite old versions?

Proficy Machine Edition 5.5:
http://plc.net.ru/viewtopic.php?f=3&t=6186

Proficy Machine Edition 5.6:
http://plc.net.ru/viewtopic.php?f=3&t=7846

This may be strange, but can you please reupload the files? The thing is that I need these versions (exactly these versions) so that I can upload/download with the version that the other technicians are using (they are external, and sometimes the machine bugs due to bad electrical flow, so another download is necessary. To avoid getting them here every single time, I wish to do it on my own, and to avoid saving the machine in another version, I need the same version which is Proficy Machine Edition 5.5