[?]: connect CITECT SCADA to SIEMENS PLC

[af.naderi]

Hi every body,
i install CITECT SCADA Ver.7 and want to connect to SIEMENS S7-315 2DP PLC.

Please anyone descibe me step by step.

Thanks

[jlcoloma]

The best option is to use as a server kepware opt to acquire data from PLC, both the serial port as ethernet, and configure Citect to access data through kepware

[af.naderi]

hi jlcoloma,Thanks for your guide, but my problem is that i don't know how can do it.
Citect is not user friendly, and i don't know difrence between board, IO Device, ...
if it is posible, please explain me how can use kepware or siemens ethernet driver to do that.
Thanks a lot

[af.naderi]

hi every body,
Could anyone help me ?

[robotcu]

You must install "Simatic Net" your computer for communication. (Simatic Net V6.0; V6.05; V6.1 or V6.2 for Win XP)

You look "Citect Help / Driver Help / S7 Driver / MPI- Profibus {or } TCP/IP Config" for Configration settings;

[SandyD]

hi every body,
Could anyone help me ?

Use PCDirect Driver:

http://plcforum.uz.ua//I ... Siemens.7z

I check and work with it personally!