[?]: OMRON HMI NS10TV00 V2 Touch screen not work

[isteak007]

MY OMRON HMI NS10TV00 V2 Touch screen's touch system do not work.

So i cant run my machine

What is the Problem?

is there any way to run plc without HMI?

i heard about NS- Runtime & CX- Supervisor this software can run plc without a HMI.
it uses PC as a HMI
Now how can i do it?
i download cx supervisor but i dont know how to do that?

PLEASE HELP

[Homeroid_BL]

Download CX-One.Here you will find CX-Designer included.
In order to control your machine from PC, you will need source project for NS10. Generaly, PLC can normaly run WITHOUT HMI connected (in most cases PLC does not knw if HMI is connected at all), but, you are not able to change parameters and issue commands to machine.

[isteak007]

I have Source Project but i dont know how can run my machine with cx designer.
do you know How to do it?


Thanks

[Homeroid_BL]

Open project.
Then Tools/Test/Connect to PLC

Chooose network (works with hostlink ONLY!!!)

[isteak007]

Thank You For your reply

Do i need any special Cable?

or cable that used in plc to hmi.

Thank You

[Homeroid_BL]

You need a PC-PLC cable (cable for CX-Programmer, to connect to PLC)!!!