[?+]: WinCC Flexible 2008 SP2 support wide screens

[Netik]

I planned finalize high level HMI interface using WinCC project.

I need system that can connect with S7 200 controllers. WinCC with such controllers works only via OPC server, but I can`t
come over such problem as big delay reading tags using such OPC server as PC Access, when some of PLC was not in work.

I choose WinCC Flexible (after special testing exactly with such condition, WinCC flexible not show such behavior, as WinCC &
PC Access together).

But I have problem using WinCC Flexible. Problem connected with choosing screen resolution.
Before I planned realization with WinCC, and my wide screened computer monitor not was a problem.

How can I sets settings in WinCC Flexible for non-standard screen resolution? as variant for 1440х900 screen resolution.

Thank you.

[CoMod]

viewtopic.php?f=36&t=8650
WinCC flexible 2008 SP2

Widescreen for PC Runtime
* 1440 x 900, 1680 x 1050, 1920 x 1080, 1920 x 1200

[Netik]

viewtopic.php?f=36&t=8650
WinCC flexible 2008 SP2

Widescreen for PC Runtime
* 1440 x 900, 1680 x 1050, 1920 x 1080, 1920 x 1200

Thank you very much!

[Homeroid_BL]

You can connect S7-200 to WinCC Flex via MPI (I did it, using USB/Multimaster cable and PC-Adapter, both cables work.) Works also on the MPI network.

[Netik]

Connection that I use was MPI. All my plc works via MPI connection.

For such task I use standard Profibus/MPI card with PCI interface.