[?]: GSD for OP73

[lyc20100418]

Turck heroes who can provide a bus module and OP73 of the GSD file? Internet is a not found. Need the following two of the GSD file Thank you
FXDP-IM16-0001
0P73
S7 hardware which there are two file types:
DA020404.gsd and TU1_FF1F.gsd

[Umencho]

Turck heroes who can provide a bus module and OP73 of the GSD file? Internet is a not found. Need the following two of the GSD file Thank you
FXDP-IM16-0001
0P73
S7 hardware which there are two file types:
DA020404.gsd and TU1_FF1F.gsd

Hello,

Regards OP73 GSD file:
You don't need a GSD file.
When you open project in Step7, you can insert a new object.
Here you choose Simatic HMI station (WinCC flexible is integrated in Step7).
Then WinCC flexible starts and you can choose your panel (OP73).
Then you go to Netpro (Configure network), here you see the HMI station.
Double click on 'HMI MPI/DP' and connect the panel to the right network.
Take a look also at http://www.automation.siemens.com/WW/fo ... anguage=en .
FXDP-IM16-0001 - http://www.turck-usa.com/Illustrations/ ... 0Files.zip .
Look for tu6_ff1f.gsd

Best regards,
Umencho