[?]: unDemo IBH SOFTPLC SOFTWARE

[Pokajy]

IBH SOFTPLC SOFTWARE
HI
I hope everyone is ok.

I used Ibh softplc software.
http://www.ibhsoftec-sps.de/english/PLC_S7.htm
It was good But it was demo version. Someone have cracked version? can u share?

I did not try but can we use Winac or Winlc for same work?

I want to make s7 programming without plc hardwares. I'll test my scada programs etc.

[Pokajy]

can I install rtx and make wincc project with that?

[sania]

yes , but for s7-plc & wincc you can use plcsim too

[Link]

so,

IBH Soft PLC / SPS V.4.04
S7-300 and S7-400
with Key

http://www.share-online.biz/download.php?id=OFA073ALROP
or
http://plcforum.uz.ua//S ... V.4.04.zip

have fun

[Pokajy]

Thanks alot Link.


Link have you any idea about where we can find cracked SoftPLC S5-943 / S5-945 ?

[suiram]

Do you also have the IBH OPC Server?

[Nedjeljko]

Is it possible to connect I/O cards to the SoftPLC and how configure HW to the SoftPLC?

Thanks for link - Link

[Pokajy]

Zdravo
yeah it's possible. if u use profibus card like cp5611 u can communicate ur soft plc with real plcs with profibus. or u can use ethernet too.

There are also PCI cards for pc which can read 4-20mA or 0-10V analog values and u can use this informations in ur soft plc
( pci cards usually needs converters)

[Nedjeljko]

...thats greath...I can connect ET200M to the CP5512 (have this one in my notebook) and put some cards to the ET200M.

[Nedjeljko]

Hi Pokajy,

After instalation of softPLC, in Step7 stePG/PC interface I dont have profibus comunication for IGH, there is only MPI.
How to configure for example comunication between PC(softPLC) and Et200M with I/O cards (digital Inputs, Outputs...)?

[Pokajy]

Nedjeljko u just need to install driver.
add/remove driver , CIF profibus configuration with PU
u can find guide in manual.
http://ibhsoftec-sps.com/downloads/engl ... Manual.pdf

But I learnt that as a Profibus hardware ibhsoftplc does not support siemens cp5611 pci card but it supports Hilscher or Beckhoff cards.

If u have cp5611 or similar card u can use winlc rtx.
I've a project with winlc rtx with cp5611 card, I made communication with real plc with using dp/dp coupler via profibus.

as u know ET200M is working with profibus but there is a newer product "IM 153-4 PN" softplc may work with profinet. I'm not sure. We must spend some time on it.

I'm generally using ibhsoftplc for function block tests

[TaaviM8]

has anyone tested this also with Braumat/Sistar?

recipeserver is working with this?

Regards,
Taavi

[chelina63]

Dear Link,
can you upload :

"IBH Soft PLC / SPS V.4.04
S7-300 and S7-400
with Key"
because download links not working,
Thanks

[igormf]

Anybody has this link and is able to share?

Anybody have the serial number? Thanks!

[roadjet]

can someone share softplc again?

thanks in advance

[chriss_russell]

hi could someone re-upload this or another version please

[CLPGuy]

Also looking for this software. Anyone who can post a link?

[saksit]

https://drive.google.com/file/d/1VlqnfD ... sp=sharing
password: plc247.com

[jovica007]

Please share the crack for IBH OPC SERVER