[Link]: Step5 V6.x software

segaauto · Post by **segaauto** » Tue Oct 12, 2010 6:15 am

STEP5_V6.*.rar

https://mega.nz/folder/IA1mQCLQ#W8AAbbkJwrqcSIuyhUBfGQ

https://disk.yandex.ru/d/E7g4Fgp_heD7Uw

Daniel_Brasil · Post by **Daniel_Brasil** » Sun Oct 31, 2010 11:58 am

Hello segaauto,

The STEP5 V7.23 don´t work for you?

Bests regards,
Daniel

segaauto · Post by **segaauto** » Mon Nov 08, 2010 11:54 pm

No it has to be a version lower tan 7.0

I need to run comm521 basic ver 1.2 and it only runs in Ver 6.X

Thanks.

segaauto

3Mendo · Post by **3Mendo** » Thu Nov 11, 2010 8:56 pm

Try this STEP_5_V6.5.zip, I just uploaded it.

3.5 MB
Good luck...

segaauto · Post by **segaauto** » Sun Nov 14, 2010 4:40 am

Thank you 3Mendo Iinstalled and is running good.

Thanks a lot.

segaauto

3Mendo · Post by **3Mendo** » Sun Nov 14, 2010 12:40 pm

You're welcome!

Marcio26 · Post by **Marcio26** » Sat Oct 15, 2016 8:01 am

Can you upload it again please?

Shaktalv · Post by **Shaktalv** » Wed Nov 16, 2016 7:07 am

Please, I need too. Thanks

chai · Post by **chai** » Sat Jun 06, 2020 3:50 am

support win xp sp3 ????

Answers to FAQs · Post by **Answers to FAQs** » Sat Jun 06, 2020 1:21 pm

STEP5 V7.23 support WinXP sp3

roggab · Post by **roggab** » Sat Jul 04, 2020 9:06 pm

hmm im trying to resurect an -95 yers lathe that i bought have eprom ckecksum error on it bought a prommer turn out its a seriall prommer so it works with pgs and later versions of step5 6.x for pc
v7 then its not supported so have tried the versions i have found but havent found a real step 5 v6.6 or later
some versions i get to work but not with my seriall prommer
anyone have a working link for v6.6 ?

regards rogga

found out i could use ws800a to read eproms to found a link and installed it anyoing in the manual for ws800a my eprom is shown with a hole bunch of others but in program only a few and not mine

:(

but im not sure manual and program indicates that i could read eprom from system sinumerik805 with tty cable
well ill se how long im lasting trying else its probably mesa cards/linuxcnc

rogga

Daniel_Brasil · Post by **Daniel_Brasil** » Wed Aug 12, 2020 12:11 am

Hello,

I have v6.03, v6.5 and v6.65 that i download in this forum, ten years ago (include user "3Mendo" uploaded file).

http://www.mediafire.com/file/v3qh05rl7 ... 5.zip/file

Password: plcforum

good lucky

roggab · Post by **roggab** » Tue Sep 01, 2020 2:05 pm

thanks have those but im not able to get my prommer working with them had a guy at ssab that have a pg but he say also he cant read my eproms i think its strange what is needed then like in the case with ws800a manual shows my eprom but program does not do i have to make some editing to the eprom list (eprom.pte) or what do i need ??

spacedev · Post by **spacedev** » Sun Jan 08, 2023 9:48 am

Could you upload one again Step5 v6.03 ?

thx

spacedev · Post by **spacedev** » Tue Jan 24, 2023 1:23 pm

Who have older version STEP5 than v6.5 ?

please upload.

thx.

spacedev · Post by **spacedev** » Mon Aug 21, 2023 3:57 am

Could someone upload Step5 v6.6? (I would like install in Windows 95)

Link · Post by **Link** » Mon Aug 21, 2023 4:16 am

STEP5_V6.65.rar

https://mega.nz/folder/IA1mQCLQ#W8AAbbkJwrqcSIuyhUBfGQ

https://disk.yandex.ru/d/E7g4Fgp_heD7Uw

roberto_battistella · Post by **roberto_battistella** » Mon Aug 21, 2023 4:42 am

password ?

Answers to FAQs · Post by **Answers to FAQs** » Mon Aug 21, 2023 7:15 am

hey, passworded file was deleted (Password: plcforum),
but second it`s unprotected, from protected file
sorry

spacedev · Post by **spacedev** » Mon Aug 21, 2023 8:58 am

This is upgrade. File name: "STEP5 for PC V6.65 Upgrade (MS-DOS)"

I can't install it under Windows 95

Could upload install files (NOT upgrade)?

Link · Post by **Link** » Wed Aug 23, 2023 6:47 am

see link again
putted back passworded file( pass: plcforum ) + added s5v6(not sure witch version it)

PLCforum.uz.ua