[?]: S5 25 pin ----- 9 pin connect to pc

[cemara]

Dear all,

i got 6es57342bf00 (s5 tty cable 5m).
i want to connect to my pc (9 pin).
this connector has a 25 pin.
i wire:

Code: Select all

25 pin ----- 9 pin
2        ------ 2
3        ------ 3
7        ------ 5

i got plc time out.
has anybody use this cable with 9 pin connector before? what do i miss here?

[Corosop15]

Code: Select all

Signal              9-pin            25-pin

Carrier Detect        1                 8 
Receive Data          2                 3 
Transmit Data         3                 2 
Data Terminal Ready   4                20 
System Ground         5                 7 
Data Set Ready        6                 6 
Request to Send       7                 4 
Clear to Send         8                 5 
Ring Indicator        9                22

[dehell]

Hi,
I think your cable it is not good!!!
Your cable it is not a TTY cable: this cable is only for PG 7XX
http://support.automation.siemens.com/W ... aller=view
Take care do not connect your serial COM to PLC, you will destroy it!!!
Best regards.

[centipede]

Look here:

http://helmholz.de/

Components for S5-Interface Converters

[indian]

try these
http://i55.tinypic.com/n3wv1f.png
http://i54.tinypic.com/2a014kw.png
http://i54.tinypic.com/2eci0qp.png

[cemara]

dehell is right this cable is not a tty cable. it is used only with pg7xx.
i think what indian post is the cable configuration to connect pg7xx with s5 cpu.
i guess i have to find a tty cable. thank you everybody.

[manus_a]

Hi cemara

I also had problem with step 5 software when I used converter USB ---> RS232 9pin ---> RS232 25pin ---> TTY ---> PLC S5
but software PG2000 it working with same converter
Try PG2000
Best regards.