[?]: S7 317-2DP CPU going to Stop Mode

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
arun_ikon
Posts: 3
Joined: Fri Jan 28, 2011 2:54 pm

[?]: S7 317-2DP CPU going to Stop Mode

Post by arun_ikon »

We are facing the problem in S7 317-2DP CPU, its going to stop mode.

PLC ARRANGEMENT

Rack 0
Slot 1-Power supply Slot 2-CPU Slot 3-IM Slot4-11-DI Cards (321-1BH02-0AA)
Rack1
Slot 3-IM Slot 4-10-DO Cards (322-1HF02-0AA0) Slot11-AI (331-7KF02-0AB0)
Rack2
Slot 3-IM Slot4-6-AI Cards Slot7 -9-AO Cards (332-5HF00-0AB0)


We are slave system we are running the plc either hardwired or profibus according to selection. We have six Pumps starting fro master plc. If we start one by one upto 5 pumps are running if we start any pump in last (i.e. sixth) CPU Going to stop Mode with 5 min. We have Changed All analog card and including CPU its going to stop mode. For Your information we have downloaded OB121, OB122 Block also but it is still going to stop mode. Set point for valve we were getting from master plc.

Finally we have changed analog input (set point to valve) in the rack 1 Slot 4(Replaced from Slot11) it was run for six hours then same problem came. What could be reason?

Diagnostic buffer of module CPU 317-2 DP

Code: Select all

Order No./ Description        	Component                     	Version                       
6ES7 317-2AJ10-0AB0           	Hardware                      	5                             
- - -                         	Firmware                      	V 2.6.5                       
Boot Loader                   	Firmware expansion            	A 10.13.9                     

Rack:                         	0
Slot:                         	2


Event 1 of 100:  Event ID 16# 4548
STOP caused by I/O management
Previous operating mode: RUN
Requested operating mode: STOP (internal)
Internal error, Incoming event
07:32:53.457 AM  06/15/1994


Event 2 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    568
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.457 AM  06/15/1994


Event 3 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    566
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.457 AM  06/15/1994


Event 4 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    564
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.456 AM  06/15/1994


Event 5 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    562
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.456 AM  06/15/1994


Event 6 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    560
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.455 AM  06/15/1994


Event 7 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    594
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.452 AM  06/15/1994


Event 8 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    590
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.451 AM  06/15/1994


Event 9 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    586
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.451 AM  06/15/1994


Event 10 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    582
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.451 AM  06/15/1994


Event 11 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    578
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.451 AM  06/15/1994


Event 12 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    592
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.450 AM  06/15/1994


Event 13 of 100:  Event ID 16# 2943
I/O access error, writing
P area, word access, Access address:    588
Requested OB: I/O access error OB (OB122)
Priority class:  1
External error, Incoming event
07:32:53.450 AM  06/15/1994
Thanks and Regards
Arun
CoMod
Site Admin
Posts: 3992
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia

Re: [?]: S7 317-2DP CPU going to Stop Mode

Post by CoMod »

Need screencopy of your HWConfig with adress of modules

Code: Select all

I/O access error, writing
P area, word access, Access address:    ***
Requested OB: I/O access error OB (OB122)
PQW 5** is AO module.
Check HW Config adress, module mounting...
arun_ikon
Posts: 3
Joined: Fri Jan 28, 2011 2:54 pm

Re: [?]: S7 317-2DP CPU going to Stop Mode

Post by arun_ikon »

Please see the below link which will display HW config Sceen Shot with address.
We have checked Config Address and mounting Everthing seems to be OK.
Error is showing analog ouput only.

Image

Image

Give some ideas to solve the issue.
CoMod
Site Admin
Posts: 3992
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia

Re: [?]: S7 317-2DP CPU going to Stop Mode

Post by CoMod »