[?]: configure ABB NDPA-02 PCMCIA card

[zlizo]

Hi,
I'm having problem to use PCMCIA Card (NDPA-02) on my new laptop through express card/pcmcia adapter,
windows xp detect card attached as PCI standard PCI-to-PCI bridge and Drive Window does not detect card.
What driver to install so the windows recognize card proper to establish communication with abb drive.

[SOULHACK]

Install DWSP0810, you need NTNISA driver. You can download this pack at ABB.com.


Att
SoulHack

[Umencho]

Hello,

What kind of Windows OS did you use there? Basically you don't need any driver to be installing there. Just DriveMon and that's it.

Best regards,

[zlizo]

Install DWSP0810, you need NTNISA driver. You can download this pack at ABB.com.

I tried that and it didn't work still same problem I think that adapter express card => pcmcia does not support communication abb card require.

[SOULHACK]

You want to use the new RUSB-02 USB/DDCS. Your adapter support PCMCIA 32 bits.

Regards
SoulHack

[zlizo]

@SOULHACK thanks for the advice will try.

[nelutu1973]

did anyone manage to communicate with NDPA-02 via some PCI / PCMCIA converter for laptop