[?]: micromaster 4 .200 file type for comet 200

[wendrahooreg]

Dear All,

Right now, a friend of mine is having a trouble with an s5 system. He needs the .200 file type for micromaster 4 to be used in comet 200 v4.1 for configuring an im 308-b. We have searched almost everywhere and are very frustrated as we have found nothing. We hoped some of you may still hold this precious file and are willing to share with us.

Here is the situation:
- the CPU is 135u
- connected to a profibus network using im 308-b
- we need to add a mm440 profibus to the network (already using the profibus module for the mm440) so that we can read and write parameters

I already know that to configure im 308-b, I will need an old S5 v6 and an old comet 200 v4.1. I already have them running fine on an old PG 720 C. The only thing left is the .200 file.

Thank you.

[wendrahooreg]

Dear All,

As an update, I have a backup plan to make the MM440 communicates via a "gateway". The "gateway" I have in mind are:
1. S5-95U DP MLFB: 6ES5 095-8MD01
2. CPU 215-2 DP MLFB: 6ES7 215-2.D00-0XB0

What I mean is that I am willing to make a program for the CPUs and let them communicate with the 135u and with the MM440 too. So whenever the 135u tries to read the MM440 parameter, the other CPU will give read the MM440 parameter and give the 135u the result. And the other way round when it is writing.
But before I am able to do so, again I will need the .200 file type for the CPUs. So should any of you has them and are willing to share with me, I will be most grateful.

Thank you.