[?+]: 800xA System Graphic element deploy?

другие контроллеры
samsweden
Posts: 16
Joined: Wed Dec 01, 2010 7:33 pm

[?+]: 800xA System Graphic element deploy?

Post by samsweden »

Hai,

I am using 800xA system and simulator for developing and simulating 10 MW power plant for my thesis.

In Aspects the inherted column graphic builder, graphic element etc are showing false except object icon. when i tried to edit graphic element, VB window is opening.
But i couldnt able to cofigure and deploy graphic aspects.
I am getting error:
The requested graphic element is not deployed.
If any one have any suggestion please post your comments will be helpful for me.

Thanks,

sam.
Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: 800xA System Graphic element deploy?

Post by Linkinx64 »

Is your graphic element belongs to some library? If yes - check the library state. Make sure the library state is Open.
Deploy in VB:
Image
samsweden
Posts: 16
Joined: Wed Dec 01, 2010 7:33 pm

Re: [?]: 800xA System Graphic element deploy?

Post by samsweden »

Hi Linkinx64,

Thanks for the help. I got it, its working now.

regards,
Sam.
samsweden
Posts: 16
Joined: Wed Dec 01, 2010 7:33 pm

Re: [?+]: 800xA System Graphic element deploy?

Post by samsweden »

Hi Linkinx64,

In plant explorer workplace, I was trying to edit the storage tank in graphic element. When i click edit, VB window is opening but the storage tank image is not there. I was trying to learn as per the example given in the help menu.
Please can you give me some examples like how to built a boiler, motor ects. Will be helpful for me.

Thanks in advance,

regards,
sam.
Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: 800xA System Graphic element deploy?

Post by Linkinx64 »

samsweden wrote:In plant explorer workplace, I was trying to edit the storage tank in graphic element. When i click edit, VB window is opening but the storage tank image is not there. I was trying to learn as per the example given in the help menu
Probably you met an aspect wrapper component: if you see an empty rectangle in VB - it is the link to parental component, not to the tank itself. Checkout properties in this case.
I have one demo project for Compact HMI 800 v4.1 (limited version of 800xA): Boiler station. There are tank, pump, etc.
I will try to adapt it to the 800xA SV5.0 and send to you after.

regards, Linkinx64
Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: 800xA System Graphic element deploy?

Post by Linkinx64 »

Hi, Sam

Here a complete backup of the boiler station: http://depositfiles.com/files/omryliwes
Archive password: boiler

The follow 800xA components require to be installed before restore (marked with translucent blue rectangle):
Image

Manual maintenance:
1. Expand Control Structure in the Plant Explorer. Select Control Network -> OPC Data Soure Definition -> New -> Add.Choose OPCDA_Provider_YourNodeName and click OK. Then on bottom click Apply.
2. Open and start SoftController. Start - means click Start button.
3. Open OPC Control Panel.
4. Do as shown on image below (IP address may be different) for both - Data Access and Alarm and Event tabs:
Image

5. Open Control Builder. Go to File -> Open Project-> DemoProject. Set SoftController system identity (IP) same as done at the 3rd step for OPC (see picture below):
Image
Download project to the softcontroller.

Motor in Object Type Structure:
Image


Graphic Display in Function Structure:
Image

Enjoy!
samsweden
Posts: 16
Joined: Wed Dec 01, 2010 7:33 pm

Re: [?+]: 800xA System Graphic element deploy?

Post by samsweden »

Hi Linkinx64,

Thank a lot for your help.

regards,
Ila.
samsweden
Posts: 16
Joined: Wed Dec 01, 2010 7:33 pm

Re: [?+]: 800xA System Graphic element deploy?

Post by samsweden »

Hi Linkinx64,

I couldnt able to figure out how to access the backup of th boiler station in the plant explorer. Can you elaborate how to do it, will be helpful for me.

I was trying to design motor in plant explorer

Image

when i try to edit it, i am getting the message

Image


if i click dont sent and try to edit again, i am getting VB window like this, not getting the actual motor design in VB.

Image



Please let me know if you have any suggestion how to rectify this problem.

Thanks in advance,

regards,
Ila
Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: 800xA System Graphic element deploy?

Post by Linkinx64 »

To install boiler:

1. Backup your existing system (MySystem)
Go to maintenance structure, rightclick on Backup definitions object choose New Object -> Full backup definition.
Image
Select Aspect Directory backup on the Scope tab. Click Start Backup button on Summary and Start Backup tab and wait while backup will be created.
Image

2. Delete your system: Open Configuration Wizard -> System Administration -> MySystem -> Systems -> Stop.
Again: Configuration Wizard -> System Administration -> MySystem -> Systems -> Delete.

3. Recover boiler station: Configuration Wizard -> Recover System. Specify path to the unpacked Boiler project and start recover. Preserve existing system name and paths.
During recovery you will get a message that 2 extenisons are not installed (System Instructions and something else): continue anyway (yes to all).

4. Restart node to complete recovery.

-------------------------------------------------------------------
In order to recover error you met:

Verify why there's no connection to the system.
It may occur if:
1. IP address has been changed during work
Solution: restart Server (Config.Wizard->Stop Server, again: Config.Wizard->Start Server) after IP address has been changed.

2. One or more afw (aspect framework) services not installed, stopped, running under wrong account or fail to logon.
Solution: use Config.Wizard->System Software and User Settings to set password for all afw services.

3. Firewall is active.
Solution: Disable firewall.
samsweden
Posts: 16
Joined: Wed Dec 01, 2010 7:33 pm

Re: [?+]: 800xA System Graphic element deploy?

Post by samsweden »

Hi Linkinx64,

Thanks you very much for the help.

regards,
Ila.
hina
Posts: 38
Joined: Tue Aug 30, 2011 8:34 pm

Re: [?+]: 800xA System Graphic element deploy?

Post by hina »

Dear Linkinx64,

Please Kindly reUpload again because the link already dead
[dead]
Thank you very very very much for support

Best regards
Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: 800xA System Graphic element deploy?

Post by Linkinx64 »

I have checked collection and backup: unfortunately, boiler project (for 800xA) wasn't saved :(

If only Sam still have that archive...