Request: DPL Toolkit from control techniques

[lewis]

hello guys
my company has an old machine which use unidrive with UD73 card,and there's program in UD73 Card,
I want to update the driver to unidrive sp series,
and i search on internet that i have to upload the UD73 card program
Could anyone help me?
thanks a lot

[venix]

Hello,

You must use SyPT Pro to do that.
I think the best way is to contact the local representive of Control Techniques to buy the software wich comes with the programming cable for SP.

To connect to UD73 I succed with a RS232 cable (not all the time) or with a RS232-RS485 converter.

Best regards,
Venix

[lewis]

Venix ,Thanks for your answer,I have upload the program use SyPT Pro with RS232 cable,but there's some warnings in the program.

[w1naenator]

which protocol need to use?

[demicv]

I desperately need for a dpl toolkit software to program a ud70 module for uni1401 series inverters. thanks all

[vdat_bg]

Hello,

I need DPL Toolkit v3.3.
Can Anybody send to me, please.

I checked on control techniques site, but I didn't find it.

Best regards,
Vasil Atanasov

[Mx_man]

Hi,

I'm new to this forum. I'm currently working on a windmill project. I bought this windmill without the electronics which consist of a telemecanique PLC with 2 Control techniques unidrives.
The software files of the PLC and the Unidrives where included.
I'm now busy building the electronics according to the supplied electrical diagram which was included in the sale.
The only problem or challenge I have now is that in both unidrives an UD70 module must be fitted. finding those modules will be a challenge and programming even more so.
The software that I need is DPL Toolkit as described above. Is some one able to share that with me? It will help me a lot!

I thought all was included in the sale but the software that was included was the installed version on a pc so I'm missing some files so my dpl Toolkit isn't working.

All the help will be much appreciated!

[Mx_man]

Thanks a lot A12sdd!

[JodPLC]

Hi,
I'm in the same situation as the guys above, I need the DPL Toolkit app. Any hint of where it could be found would be very appreciated. Thanks.
Best regards,
Jod

[aerol1nepro]

Hi, , I need the DPL Toolkit app. Can you help me? Thanks. Best regards

[promupac]

Hello,

I need DPL Toolkit.
Can Anybody send to me, please.

It is very difficult to find this program today.

[mohdabshr]

Hi
download it from below link it will delete after 7 days:

https://we.tl/t-PEC5S4BRWm

[Olson]

Hello

Please, I need DPL TOOLKIT. Can you please reupload the files ?

Thank you in advance.

[HadiR1396396]

Greetings and Regards
Please guide me
I set up a technique control drive(uni2403) and used the PROFIBUS method to communicate with the S7 300 PLC.
I also used PROMESS software to measure the pressure. Unfortunately, we have to program ud70 and I need the .DPL file.
Is it possible to send the UD70 program file to me?
Thanks

[acer]

Hello,
I need to connect MD29 card. For it Could you send again DPL toolkit software ?

Kindly for your support.

[MMMzzz]

Hi guys,
I'm desperate, I urgently need the DPL toolkit too.

Can anyone help me?
I would be infinitely grateful