Hello:
Anybody knows how to configure the coupler CM575 for DeviceNet with a AC500 Procesor?.
The AC500 Procesor is a PM583-ETH version 2.0 and I'm using the Control Builder Plus
Thanks in Advance.
[?]: AC500 V2.0 with the coupler CM575 for DeviceNet
-
- Posts: 28
- Joined: Tue Oct 19, 2010 5:59 pm
-
- Posts: 894
- Joined: Sun Apr 11, 2010 3:00 am
- Location: Russia
-
- Posts: 894
- Joined: Sun Apr 11, 2010 3:00 am
- Location: Russia
Re: [?]: AC500 V2.0 with the coupler CM575 for DeviceNet
Please, process my request regarding Digivis literature. Here: viewtopic.php?f=43&t=15622
Thanks in advance.
Thanks in advance.
-
- Posts: 28
- Joined: Tue Oct 19, 2010 5:59 pm
Re: [?]: AC500 V2.0 with the coupler CM575 for DeviceNet
ok the link is updated
But I have the new control builder for AC500 PLC and the consequence is the Sycon.net tool is removed of the new version of PS501.
Do you have any example on ControlBUilder plus on DeviceNet? Because I use a new model of PLC that is PM583, that's only free on the new version 2.0
Thanks in advance.
But I have the new control builder for AC500 PLC and the consequence is the Sycon.net tool is removed of the new version of PS501.
Do you have any example on ControlBUilder plus on DeviceNet? Because I use a new model of PLC that is PM583, that's only free on the new version 2.0
Thanks in advance.
-
- Posts: 894
- Joined: Sun Apr 11, 2010 3:00 am
- Location: Russia
Re: [?]: AC500 V2.0 with the coupler CM575 for DeviceNet
I don't have an example PM583 + CM575, but i found the follow information in help file, that is clear describes how to add CM575 in project and configure module parameters:
http://www.mediafire.com/file/4m8es6e84 ... CDC125.pdf
Full help file for AC500:
http://www.wupload.com/file/1982246467/ ... 0_Help.ZIP
(Format: CHM, unblock file before unpack)
http://www.mediafire.com/file/4m8es6e84 ... CDC125.pdf
Full help file for AC500:
http://www.wupload.com/file/1982246467/ ... 0_Help.ZIP
(Format: CHM, unblock file before unpack)