[?]: unpassword 24C512.bin file from s7200 cpu226CN

[hns1979]

Dear all!

i have a PLC S7-200 CPU226CN Ver 2.01 with password!

I removed the 24C512 chip and read the contents inside with SuperPro kit (all is well)

I used S7_Unlock password for S7 200 and S7 300 MMC to read the password software and results are MJSSSJJ_(ver 5.01) and ?tmasis? (ver4.11)

I installed MicroWin 4.0 SP8 on a PC (Win XP SP2 language China) and then in the option I set language MicroWin is China.

However, when I welded 24C512 chip on the S7-200 and use cable PC Adapter / PPI (made ​​in China) to upload the software from the CPU; I used both two password (MJSSSJJ_ and ?tmasis? with CAP or not) but all wrong...

Please help me find the correct password

thank you very much...

my file: http://www.mediafire.com/?canmjy7fyz7u7af

[smsasg]

Correct password: MJSSSJJ_
It's important to enter the last character "Space"... "MJSSSJJ "

[hns1979]

Thanks smsasg!

I already use space, but it still wrong!

Anyone unlock password in CPU China?