Hi dears
I to need do a back up with prosave
but panel op17 not go to mode tranfer
Press ESC+ ARROW DOWN + ARROW RIGHT not working
can anyone help me please
Back up OP17
-
Umencho
- Posts: 508
- Joined: Mon Jul 16, 2007 12:28 pm
- Location: Europe
Re: Back up OP17
Switch OFF the panel.
Hold on ESC+ ARROW DOWN + ARROW RIGHT
Meanwhile switch ON the panel
Wait 5 sec and release the buttons.
Hold on ESC+ ARROW DOWN + ARROW RIGHT
Meanwhile switch ON the panel
Wait 5 sec and release the buttons.
-
gregar
- Posts: 116
- Joined: Fri Apr 20, 2007 1:44 pm
- Location: Europe
Re: Back up OP17
The combination of keys ESC + ARROW DOWN + ARROW RIGHT at first erases the project in memory of the panel and then set in the panel mode Ready for transfer.
Therefore it cannot be used for backup the panel project!!!
For set in the panel mode Ready for transfer and make backup the panel project it is necessary:
1. Press at first together 2 keys: ESC + ARROW UP
2. After that to power on.
3. After a few seconds to let go of the keys ESC + ARROW UP and the panel passes in mode Ready for transfer.
Therefore it cannot be used for backup the panel project!!!
For set in the panel mode Ready for transfer and make backup the panel project it is necessary:
1. Press at first together 2 keys: ESC + ARROW UP
2. After that to power on.
3. After a few seconds to let go of the keys ESC + ARROW UP and the panel passes in mode Ready for transfer.