Hi everybody !
We have Compact Control Builder AC800M v5.1 installed in a computer wich is been used as a server for a project. So, after a few weeks, when I wanted modify AC800M program I found this message:
[img]file:///C:/Users/PRamon/Desktop/8DicLaPerla/Imagen1.png[/img]
[img]file:///C:/Users/PRamon/Desktop/8DicLaPerla/Imagen2.png[/img]
This message, called "fbdld", says "Unable to create SftTree control".
Seemingly, after I verify plc functionality, the programm works fine but I would want to fix this.
PC server has these characteristics:
* WinXP Service Pack 3
* 4GB Ram
* 360 GB Rom
* Intel Dual Core
At once, Compact Control Builder didn't show this trouble, on the contrary, it worked fine.
Any body have any idea about solution
Regards
Compact Control Builder AC800M problem
-
- Posts: 894
- Joined: Sun Apr 11, 2010 3:00 am
- Location: Russia
Re: Compact Control Builder AC800M problem
I am unable to see images that stored on your local disc.RandolphC wrote:after a few weeks, when I wanted modify AC800M program I found this message:
[img]file:///C:/Users/PRamon/Desktop/8DicLaPerla/Imagen1.png[/img]
[img]file:///C:/Users/PRamon/Desktop/8DicLaPerla/Imagen2.png[/img]
Use this: http://spamm.us/
Walkthrough:
1. Reinstall J# redistributable package.
2. Reinstall Compact Control Builder.
Which exactly CB version do you have? If it is 5.1.0/0 try update it to 5.1.0/1.
-
- Posts: 11
- Joined: Mon Sep 12, 2011 9:31 pm
Re: Compact Control Builder AC800M problem
Here are the images:
Compact Control Builder is 5.1.0/0 version
Thanks for your suggest, I will try to reinstall and update CB to 5.1.0/1
Compact Control Builder is 5.1.0/0 version
Thanks for your suggest, I will try to reinstall and update CB to 5.1.0/1
-
- Posts: 894
- Joined: Sun Apr 11, 2010 3:00 am
- Location: Russia
Re: Compact Control Builder AC800M problem
By the images I see neither CB nor J# reinstall won't help.
It seems to be internal CB or project problem. Upgrade to 5.1.0/1 only may help.
Also try to change page layout (Tools -> Page Layout -> Page Setup) and repaginate function blocks.
It seems to be internal CB or project problem. Upgrade to 5.1.0/1 only may help.
Also try to change page layout (Tools -> Page Layout -> Page Setup) and repaginate function blocks.
-
- Posts: 11
- Joined: Mon Sep 12, 2011 9:31 pm
Re: Compact Control Builder AC800M problem
Thank you!!! I will try it
Greetings
Greetings