[?]: How to communicate QJ71C24N with Proface AST 3501

другие контроллеры
Fence
Posts: 22
Joined: Wed Aug 26, 2009 12:25 am

[?]: How to communicate QJ71C24N with Proface AST 3501

Post by Fence »

Hi...All
I use QJ71C24N communication with proface AST 3501
I use CH1 RS232 but I not succes,in display proface Error RHAA067(communication time out)
This my configuration.

Code: Select all

 proface              QJ71C24N

2-------------------3
3-------------------2
4-------------------6+8(jumper)
5-------------------5
7-------------------1
8-------------------4
Setting QJ71C24N CH1

Code: Select all

Operation setting=independence
Data bit=8
parity bit=exis
odd/even parity=odd
Sum Check Code=exis
online change=enable
change=enable
communication rate setting=9600
communication protocol setting=non-prosedural protocol
station number setting=0
Setting Proface

Code: Select all

[code]SIO=RS232
speed=9600
parity=odd
stop bit=1
flow conrtol=ED(DTR/CTS)
time out=2sec
retry=3
whith to send=0
[/code]


Plesase help me?
Nick_ka
Posts: 7
Joined: Fri Sep 07, 2007 7:10 am
Location: Europe

Re: [?]: How to communicate QJ71C24N with Proface AST 3501

Post by Nick_ka »

try to set up MC protocol in QJ71C24.
Fence
Posts: 22
Joined: Wed Aug 26, 2009 12:25 am

Re: [?]: How to communicate QJ71C24N with Proface AST 3501

Post by Fence »

Hello
Nick_ka
Tankyou.