Hi,
i'm testing with a beckhoff BC9000, this is new for me , a only have experience with siemens s5 s7
i'm having problems with connecting to the BC9000
i'm connected my laptopt rj45 connector to the bc9000 with a crossed cable
1. Change ip adress to an adress thats works with my home network;
Original 172.16.17.0
with ks2000 i found the bc9000 , i can go online, but i cant change the ipadress
so i used command prompt (cmd) and i used the arp commands
so i changed the ip adres to 192.168.0.195
my network range is 192.168.0.1 - 192.168.0.255
standard my ip adres of my local pc is 192.168.0.100
now i can ping to the bc9000 - this works fine
bun when i go to twincat system manager
- i add an i/o device (virtual ethernet interface)
- and then i click scan boxes but it never finds the bc9000
i tried several things and once it worked, but i don't know realy how i did this
so since this worked i started to program in plc control, and now i can alway program and transfer to the bc9000
but it is not clear for me how i make a connection to the bc9000
what is the normal procedure for connecting - configuring and parametrizing a bc9000
Thanks for the help, and sorry for my bad englisch