Need some information about PU410 or PU412 it's compatible with AC450 PM 510 and PM511.
The communication unit can be used with OPC Server for MOD 300 with Wonderware and can use AdvaBuild at the same time.
[?]: Need information about PU410
-
- Posts: 894
- Joined: Sun Apr 11, 2010 3:00 am
- Location: Russia
Re: Need information about PU410
Connection to the following controllers is supported:SOULHACK wrote:PU410 or PU412 it's compatible with AC450 PM 510 and PM511
- AC460 series
- AC410 series
- MOD 300 controller subsystem (SC controllers and model B)
- MOD 300 multibus
-
- Posts: 69
- Joined: Sun Jul 11, 2010 2:15 pm
Re: Need information about PU410
I need to upgrade two dspu131 card and one PU512, I need to choose the best choice...Could you help me???
-
- Posts: 894
- Joined: Sun Apr 11, 2010 3:00 am
- Location: Russia
Re: Need information about PU410
PU512 -> PU512V2
DSPU-131 -> PU410K01
DSPU-131 -> PU410K01
-
- Posts: 69
- Joined: Sun Jul 11, 2010 2:15 pm
Re: Need information about PU410
I can use PU410K01 with ABB PM 511.
Regards Soulhack
Regards Soulhack
-
- Posts: 894
- Joined: Sun Apr 11, 2010 3:00 am
- Location: Russia
Re: Need information about PU410
I know nothing about your plant network. Yes, from one side you can connect PU410 to one or more AC4xx controllers (though the hub). But PC<->RTA connection must be direct. Therefore, if except RTA board and connectivity server there are other TCP/IP links exist - the PU410-based solution is not for you.
Check this presentation on page 12 is what I mean: http://www.mediafire.com/view/?hkh12ys2aqbc8cg
Check this presentation on page 12 is what I mean: http://www.mediafire.com/view/?hkh12ys2aqbc8cg
-
- Posts: 69
- Joined: Sun Jul 11, 2010 2:15 pm
Re: [?]: Need information about PU410
Many thanks. This is very helpful information.
Regards SoulHack
Regards SoulHack