Hi Friends,
what should be the status of 5VDC LED in run mode.
In manual Its status in all fault conditions is given but not given for run mode.
CPU is 314C--2DP with MLFB 6ES7314-6CH04-0AB0.
regards
Amit
[?]: S7-300 CPU314C-2DP LED Status
-
amit
- Posts: 53
- Joined: Thu Apr 23, 2009 2:12 pm
- Location: India
-
kriztof
- Posts: 96
- Joined: Fri Nov 16, 2007 3:18 pm
- Location: Europe
Re: S7300 CPU314C-2DP LED Ststus
DC5V led means that there is 5V power for CPU and bus. IMO it is pure hardware signal, it doesn't depend on CPU state.
-
amit
- Posts: 53
- Joined: Thu Apr 23, 2009 2:12 pm
- Location: India
Re: S7300 CPU314C-2DP LED Ststus
So it should be on in the all CPU states.
-
kriztof
- Posts: 96
- Joined: Fri Nov 16, 2007 3:18 pm
- Location: Europe
Re: S7300 CPU314C-2DP LED Ststus
I've checked my S7-314 and S7-315-2DP, and, yes it looks that DC5V is hardware signal. I'm not electronic specialist, but, for me there is DC/DC converter that changes 24VDC (power supply voltage) to 5VDC (logic supply voltage), and probably DC5V led is directly (or through some resistor) connected to the bus.