List of application and engineering examples for SINAMICS

[speedychecker]

Hello SINAMICS Users,

Now, there is a Page available, which shows you all application and engineering examples for SINAMICS G, SINAMICS S, SINAMICS V and other drives.

The sample applications provide:
- Reusable blocks for scaling the setpoint and actual values
- Explanation of the configuration steps with screenshots
- Reliability through previously tested programs and blocks for parameter access
- Significant reduction of commissioning time
- Detailed described documentation with parts lists of the used hardware and software items

You can set the filters in combination with drive type, PLC, communication type between drive and PLC, drive function and so on.
http://www.siemens.com/sinamics-applications

[speedychecker]

Now it's available SINAMICS S: Positioning of a S120 using S7-300/400 (STEP 7 V5) with PROFINET/PROFIBUS, Safety Integrated (not via PROFIsafe) and HMI. The application shows you the positioning of several axes of a SINAMICS S120 with PROFINET or PROFIBUS connected with a SIMATIC S7-300. The safety functions of the SINAMICS S120 are controlled via terminals. The FB283 for EPOS control and a HMI for user control is used.

You can donwload the application here http://support.automation.siemens.com/W ... n/67261457.

Here you can find all applications for SINAMICS S120 http://www.automation.siemens.com/mc-ap ... anguage=en

[speedychecker]

Now it's available SINAMICS G: Speed control of a G120 using S7-300/400 (TIA-Portal) with PROFINET/PROFIBUS and Safety Integrated (not via PROFIsafe) and HMI The application example shows you the control of a SINAMICS G120 with PROFINET/PROFIBUS using a SIMATIC S7-300 PLC in TIA-Portal You can download the application example for STEP-7 V11+SP2 or STEP-7 V12.
Here you can find the application example http://support.automation.siemens.com/W ... n/60140921

All application examples for SINAMICS G120 you can find here http://www.automation.siemens.com/mc-ap ... anguage=en.

[speedychecker]

The application examples for the new SINAMICS CU250S-2 are available now.

SINAMICS G: Positionig a G120 CU250S-2 with S7-300/400 (STEP 7 V5) via PROFINET/PROFIBUS using Safety Integrated (via PROFIsafe) and HMI

SINAMICS G: Speed control of a G120/G120C/G120D/G120P with S7-300/400 (STEP 7 V5) via PROFINET/PROFIBUS using Safety Integrated (not via PROFIsafe) and HMI

You can find all SINAMICS G120 application examples here.

[speedychecker]

Now the application example is available
SINAMICS G: Speed Control of a G120/G120C/G120D using S7-300/400 (STEP 7 V5) with PROFINET/PROFIBUS and Safety Integrated (via PROFIsafe) and HMI
supplemented with the new CU250S-2 and FW V4.6

[speedychecker]

Hello together,

now is the application example to use the integrated web server of the SINAMICS S available. You can design a web page with drive parameters user defined
SINAMICS S: S120 web server - Creating user-defined web pages


And here a collection of helpful SINAMICS S120 DCC application examples

SINAMICS S: S120 DCB library “GMC” for Motion Control Applications


SINAMICS S: S120 Camming with DCC


SINAMICS S: S120 1:1 Synchronism with DCC


SINAMICS S: S120 Gearing and positioning with DCC


SINAMICS S: S120 Gearing with DCC

[kofca]

Where is possible to download SINAMICS S: S120 DCB library “GMC” for Motion Control Applications?

[speedychecker]

Where is possible to download SINAMICS S: S120 DCB library “GMC” for Motion Control Applications?

You have to contact your regional sales representative. He/she is abel to get the library for you.

[speedychecker]

Hello SINAMICS HVAC Users,

there are three new applications with SINAMICS G120P

SINAMICS G: Fans for Closed-Loop Control of Exhaust Air

SINAMICS G: Closed-Loop Control of a tunnel/car park fan

SINAMICS G: Closed-Loop Control for a staircase fan

For more application examples with SINAMICS G120 P, follow this hyperlink

[speedychecker]

Here the new SINAMICS application examples

SINAMICS G: Speed Control of a G120 (Startdrive) with S7-1500 (TO) via PROFINET or PROFIBUS with Safety Integrated (via Terminal) and HMI

SINAMICS G: Pressure controlled vacuum pumps

Transforming message from a SINAMICS drive from XML format and displaying it in clear text with the help of the SINAMICS XML Parser

SINAMICS V: Controlled Positioning of a V90 with S7‑1200 via the Pulse/Direction Interface with HMI

SINAMICS G: Speed Control of a G120 with Allen-Bradley controller (Compact/ControlLogix with RSLogix 5000) via EtherNet/IP

SINAMICS G: Positioning a G120 (Startdrive) with S7-1500 (TO) via PROFINET or PROFIBUS with Safety Integrated (via Terminal) and HMI

[speedychecker]

There are new application examples with SINAMICS

SINAMICS S: Speed control of a S120 via CANopen

SINAMICS S: Time synchronization between S7-300/400 (STEP 7 V5) and S120

For use SINAMICS with SIMATIC (S7-1200 or S7-1500) in TIA Portal, you can use the function blocks SINA_Speed, SINA_Pos and SINA_Para

Here you can download the DriveLib http://support.automation.siemens.com/W ... n/68034568

[speedychecker]

For all EtherNet/IP user, here are an application example with SINAMICS S120 controlled via EtherNet/IP


SINAMICS S: Speed Control of a S120 with an Allen-Bradley controller (Compact/ControlLogix with RSLogix 5000) via EtherNet/IP

[puno]

SINAMICS application examples from Motion Control

https://www.automation.siemens.com/mc-a ... anguage=en