problem in the telemecanique plc p57302

другие контроллеры
ELYAS_GH
Posts: 35
Joined: Mon Jan 23, 2012 11:05 am

problem in the telemecanique plc p57302

Post by ELYAS_GH »

My system is cpu p57302 telemecanique.
While working on a system that is run once and the LED lights run off ter and err and i / o light are fixed and there is no contact with the cpu.
To resolve this problem, you can reset the cpu.
What is it:
run = off
ter = light
err = light
i / o = light
pupena_san
Posts: 392
Joined: Fri Dec 18, 2009 3:02 pm
Location: Киев

Re: problem in the telemecanique plc p57302

Post by pupena_san »

it System Error
Help wrote:Processor or system errors are serious errors related either to the processor (equipment or software) or to the rack bus wiring. The system can no longer operate correctly when these errors occur. They cause the PLC to stop in ERROR status, which requires a cold restart. The next cold restart will be forced in STOP status to prevent the PLC from returning to error.
replace rack or processor module