[?]: Problem to run the visualization program MP277 FWX file

[isteak007]

I have a MP277 8" Touch, The problem is it is unable to run the visualization program FWX file,

i tried some test runtime program (FWX) file but
WinCC runtime 2008 is unable to run any fwx file.

it is showing "Please wait until runtime has been terminated"

The Machine is stopped for more than 4 years, Now my company wants to run the machine.

I already update the OS via Prosave but still same problem.

MP277 is connected to S7-300 via Ethernet

Device: MP277 8" Touch
Image: V01.01.04.00_01.16
Bootloader: 1.02
Windows CE v5.0

if anyone can help it will be much appreciated

[Info]

Project archiving and migration
http://support.automation.siemens.com/W ... n/21896449

[isteak007]

I think, The touch panel is defective.
We already order one. but it will take time.

So i tried to run the fwx file via WinCC Flexible Runtime software installed on my laptop.

But i am unable to communicate with the PLC (S7-300) via PC adapter (MPI) Cable.

Can anyone help me how can i do that? or configure it?

[Homeroid_BL]

Set in PG/PC to be Access point: Step7ONLINE - > PC adapter.
Adjust Baudrate and addresses.