industrial ethernet(ETY110) network

другие контроллеры
ELYAS_GH
Posts: 35
Joined: Mon Jan 23, 2012 11:05 am

industrial ethernet(ETY110) network

Post by ELYAS_GH »

Greetings
Is it possible that the card has ETY110 telemecanique premium plc is a plc information other information sent or received from other plc?
Thank you
pupena_san
Posts: 392
Joined: Fri Dec 18, 2009 3:02 pm
Location: Киев

Re: industrial ethernet(ETY110) network

Post by pupena_san »

Module ETY110 possible to use
- Modbus/TCP Client or Server
- UNITE TCP/IP Client or Server
ELYAS_GH
Posts: 35
Joined: Mon Jan 23, 2012 11:05 am

Re: industrial ethernet(ETY110) network

Post by ELYAS_GH »

Thanks
What function to send or receive data coding should I use?
Can ety110 cp343-1 binds to and Siemens with telemecanique connected?
Thanks
pupena_san
Posts: 392
Joined: Fri Dec 18, 2009 3:02 pm
Location: Киев

Re: industrial ethernet(ETY110) network

Post by pupena_san »

1. ETY 110 TSX Premium has a built-in Modbus/TCP Server, does not require any function call in user programm.
2. In Simatic 300 use Open Modbus TCP or implement the protocol.
ELYAS_GH
Posts: 35
Joined: Mon Jan 23, 2012 11:05 am

Re: industrial ethernet(ETY110) network

Post by ELYAS_GH »

tanks
Do you need a special setting in the network card?
Need to use a specific function is?
I use PL7 V4.4
pupena_san
Posts: 392
Joined: Fri Dec 18, 2009 3:02 pm
Location: Киев

Re: industrial ethernet(ETY110) network

Post by pupena_san »

ETY 110 TSX Premium has a built-in Modbus/TCP Server, does not require any function call in user programm and any specifing setting, only IP address.