Analog input & output 800xA 5.1 (control builder m professio

другие контроллеры
azgor_03
Posts: 27
Joined: Mon Dec 30, 2013 5:23 am

Analog input & output 800xA 5.1 (control builder m professio

Post by azgor_03 »

to configure analog input and analog output, which aspect need to take in process graphics builder editor page (800xA 5.1 control builder M professional) so that operator can give set point from face plate as well as he can monitor analog value.
pls send a procudure
Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: Analog input & output 800xA 5.1 (control builder m profe

Post by Linkinx64 »

The graphics aspect "DisplayElementValue" in the SignalInReal and SignalOutReal is intended to show an analog value on the graphic display. On clicking this item from a graphic display an object faceplate will be called to let operator seeing the channel/logic value and set it manually if required. (force IO signal).