Hi guys, I need some help...
I have a MP177 that shoud be running with a WinAC MP 2008. However i did make all steps from wizards provide by Simens and the PLC looks like don't exist.
The Steps:
Simatic Manager 5.5
1 - I did create a new project in simatic manager
2 - I did change the hardware config, saved and compiled
WINCC FLEX 2008
3 - Load the Lib WinAC MP
4 - Build the screen with WinAC_MP_Home & WinAC_MP_Tuning
5 - Load the runtime
When i started the IHM and open the "WinAC_MP_Home" screen there no response from PLC (no version showed), however a can load te PLC program into de MP177 and that ok. Te CPU is allways in STOP mode. The keyswitch is locked? This key shoud be bypassed somehow?
Please Help me!
Tks